https://www.phoenixcontact.com/us/products/1417390
Contact insert module - HC-M-02-AT-F-35 - 1417390
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Contact insert module, Number of positions: 2, Socket, Axial screw connection, 1000 V, 100 A, 10 mm² ... 35
mm², Application: Power
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
2 STK
GTIN
GTIN
4055626112701
Weight per Piece (excluding packing)
70.000 g
Custom tariff number
85366990
Country of origin
Poland
Technical data
Dimensions
Height
50.3 mm
Width
34.2 mm
Length
29.4 mm
Electrical characteristics
Note
For HEAVYCON HC-B6 to B48 housing, snap-in module frame required,
axial connection for 4 mm Allen key
Rated voltage (III/3)
1000 V
Rated current
100 A
Rated surge voltage
8 kV
Connection profile
2
04/13/2017 Page 1 / 7
https://www.phoenixcontact.com/us/products/1417390
Contact insert module - HC-M-02-AT-F-35 - 1417390
Technical data
Ambient conditions
Ambient temperature (operation)
-40 °C ... 125 °C
Mechanical characteristics
Conductor cross section
10 mm² ... 35 mm² (The cross section specification refers to the geometric
cross section of the cable used)
Connection cross section AWG
4 ... 2
Stripping length of the individual wire
13 mm
Tightening torque
6 Nm (10 mm² ... 16 mm²)
7 Nm (25 mm²)
8 Nm (35 mm²)
Wire diameter including insulation
11.4 mm
Hexagonal socket
SW 4
Insertion/withdrawal cycles
≥ 500
Minimum housing height
72 mm
General
Series
HC-M-HS
Color
light gray
Number of module slots
2
Connection method
Axial screw connection
Flammability rating according to UL 94
V0
Degree of pollution
3
Overvoltage category
III
Assembly instructions
Use HC housing h >= 72 mm. Connection of the wires using a 4 mm. Allen
wrench.
Axial screw connection only for stranded wires.
Plug-in connections may only be operated only when there is no load/
voltage.
Connection
Note for axial connection method
The specified conductor cross sections refer to the geometric cross
section of the used conductor.
The use of conductors with a geometric cross section that deviates greatly
from the nominal cross section of the conductor should be checked first.
The wiring space of the axial screw technology has been designed for
fine strand conductors as per VDE 0295 class 5. Deviating conductor
superstructures (e.g. class 6 conductors) must be checked before use.
Connection
It must be ensured before installation that the ball screw is completely
turned back (chamber is open). Twisting the conductors is not allowed.
The cores must be pushed up to the end of the contact chamber (until the
contact is insulated). Keep the core in this position and tighten it using
an Allen key. The required core end must be cut before a reconnection.
Tightening the connection screw is allowed only once in order to prevent a
breakage of the litz wire.
Material data
04/13/2017 Page 2 / 7
https://www.phoenixcontact.com/us/products/1417390
Contact insert module - HC-M-02-AT-F-35 - 1417390
Technical data
Material data
Contact material
Copper alloy
Contact surface material
Ag
Contact carrier material
PC
Standards and Regulations
Flammability rating according to UL 94
V0
Drawings
Schematic diagram
Dimensional drawing
29,3
51,5
34,1
1
2
Socket module
Connector pin assignment
Diagram
Schematic diagram
Operating current [A]
200
180
160
2
140
120
100
80
1
60
40 1 = 25 mm2
20 2 = 35 mm2
0
0
20
Axial connection
40
60
80
100
120
Ambient temperature [°C]
Derating diagram (3 modules in HC-B 24 housing)
Classifications
eCl@ss
eCl@ss 5.1
27143424
eCl@ss 6.0
27143424
eCl@ss 8.0
27440205
eCl@ss 9.0
27440217
04/13/2017 Page 3 / 7
https://www.phoenixcontact.com/us/products/1417390
Contact insert module - HC-M-02-AT-F-35 - 1417390
Classifications
ETIM
ETIM 5.0
EC000438
ETIM 6.0
EC000438
UNSPSC
UNSPSC 13.2
39121421
Approvals
Approvals
Approvals
EAC / CSA / UL Recognized
Ex Approvals
Approval details
EAC
7500651.22.01.00246
CSA
http://www.csagroup.org/services/testingand-certification/certified-product-listing/
13631
mm²/AWG/kcmil
2
Nominal current IN
100 A
Nominal voltage UN
600 V
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
mm²/AWG/kcmil
2
Nominal current IN
127 A
Nominal voltage UN
600 V
E118976
04/13/2017 Page 4 / 7
https://www.phoenixcontact.com/us/products/1417390
Contact insert module - HC-M-02-AT-F-35 - 1417390
Accessories
Accessories
Module carrier frame
Module carrier frame - HC-M-B06-MF-B - 1417398
Module carrier frame, Size: B6, Type: for the panel mounting side (a, b, c, ...), 4 mm² ... 6 mm², Application: Module
carrier frame
Module carrier frame - HC-M-B10-MF-B - 1417399
Module carrier frame, Size: B10, Type: for the panel mounting side (a, b, c, ...), 4 mm² ... 6 mm², Application: Module
carrier frame
Module carrier frame - HC-M-B16-MF-B - 1417400
Module carrier frame, Size: B16, Type: for the panel mounting side (a, b, c, ...), 4 mm² ... 6 mm², Application: Module
carrier frame
Module carrier frame - HC-M-B24-MF-B - 1417402
Module carrier frame, Size: B24, Type: for the panel mounting side (a, b, c, ...), 4 mm² ... 6 mm², Application: Module
carrier frame
Module carrier frame - HC-M-B06-MF-H - 1417403
Module carrier frame, Size: B6, Type: for the sleeve side (A, B, C, ...), 4 mm² ... 6 mm², Application: Module carrier frame
04/13/2017 Page 5 / 7
https://www.phoenixcontact.com/us/products/1417390
Contact insert module - HC-M-02-AT-F-35 - 1417390
Accessories
Module carrier frame - HC-M-B10-MF-H - 1417404
Module carrier frame, Size: B10, Type: for the sleeve side (A, B, C, ...), 4 mm² ... 6 mm², Application: Module carrier
frame
Module carrier frame - HC-M-B16-MF-H - 1417405
Module carrier frame, Size: B16, Type: for the sleeve side (A, B, C, ...), 4 mm² ... 6 mm², Application: Module carrier
frame
Module carrier frame - HC-M-B24-MF-H - 1417406
Module carrier frame, Size: B24, Type: for the sleeve side (A, B, C, ...), 4 mm² ... 6 mm², Application: Module carrier
frame
Mounting material
Cable lug - HC-M-MHR-PE16 - 1636981
Cable lug for HEAVYCON-MODULAR; PE connection extension to 16 mm², for crimping with crimp pliers
Torque tool
04/13/2017 Page 6 / 7
https://www.phoenixcontact.com/us/products/1417390
Contact insert module - HC-M-02-AT-F-35 - 1417390
Accessories
Torque screwdriver - TSD-M 6NM - 1212226
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 3 ‑ 6 Nm
Phoenix Contact 2017 © - all rights reserved
http://www.phoenixcontact.com
04/13/2017 Page 7 / 7
