1417392

https://www.phoenixcontact.com/us/products/1417392 Contact insert module - HC-M-02-AT-M-35 - 1417392 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Contact insert module, Number of positions: 2, Pin, Axial screw connection, 1000 V, 100 A, 10 mm² ... 35 mm², Application: Power Key Commercial Data Packing unit 1 STK Minimum order quantity 2 STK GTIN GTIN 4055626112718 Weight per Piece (excluding packing) 70.000 g Custom tariff number 85366990 Country of origin Poland Technical data Dimensions Height 49 mm Width 34.2 mm Length 29.4 mm Electrical characteristics Note For HEAVYCON HC-B6 to B48 housing, snap-in module frame required, axial connection for 4 mm Allen key Rated voltage (III/3) 1000 V Rated current 100 A Rated surge voltage 8 kV Connection profile 2 04/10/2017   Page 1 / 4 https://www.phoenixcontact.com/us/products/1417392 Contact insert module - HC-M-02-AT-M-35 - 1417392 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 125 °C Mechanical characteristics Conductor cross section 10 mm² ... 35 mm² (The cross section specification refers to the geometric cross section of the cable used) Connection cross section AWG 4 ... 2 Stripping length of the individual wire 13 mm Tightening torque 6 Nm (10 mm² ... 16 mm²) 7 Nm (25 mm²) 8 Nm (35 mm²) Wire diameter including insulation 11.4 mm Hexagonal socket SW 4 Insertion/withdrawal cycles ≥ 500 Minimum housing height 72 mm General Series HC-M-HS Color light gray Number of module slots 2 Connection method Axial screw connection Flammability rating according to UL 94 V0 Degree of pollution 3 Overvoltage category III Assembly instructions - Use HC housing h >= 72 mm - Connection of wires using a 4 mm Allen wrench - Axial screw connection only for stranded wires - Plug-in connections may only be operated only when there is no load/ voltage Connection Note for axial connection method The specified conductor cross sections refer to the geometric cross section of the used conductor. The use of conductors with a geometric cross section that deviates greatly from the nominal cross section of the conductor should be checked first. The wiring space of the axial screw technology has been designed for fine strand conductors as per VDE 0295 class 5. Deviating conductor superstructures (e.g. class 6 conductors) must be checked before use. Connection It must be ensured before installation that the ball screw is completely turned back (chamber is open). Twisting the conductors is not allowed. The cores must be pushed up to the end of the contact chamber (until the contact is insulated). Keep the core in this position and tighten it using an Allen key. The required core end must be cut before a reconnection. Tightening the connection screw is allowed only once in order to prevent a breakage of the litz wire. Material data 04/10/2017   Page 2 / 4 https://www.phoenixcontact.com/us/products/1417392 Contact insert module - HC-M-02-AT-M-35 - 1417392 Technical data Material data Contact material Copper alloy Contact surface material Ag Contact carrier material PC Standards and Regulations Flammability rating according to UL 94 V0 Drawings Schematic diagram Dimensional drawing 29,3 49 34,1 1 2 Male insert Connector pin assignment Diagram Schematic diagram Operating current [A] 200 180 160 2 140 120 100 80 1 60 40 1 = 25 mm2 20 2 = 35 mm2 0 0 20 Axial connection 40 60 80 100 120 Ambient temperature [°C] Derating diagram (3 modules in HC-B 24 housing) Approvals Approvals Approvals EAC / CSA / UL Recognized 04/10/2017   Page 3 / 4 https://www.phoenixcontact.com/us/products/1417392 Contact insert module - HC-M-02-AT-M-35 - 1417392 Approvals Ex Approvals Approval details EAC      7500651.22.01.00246 CSA    http://www.csagroup.org/services/testingand-certification/certified-product-listing/  13631     mm²/AWG/kcmil 2 Nominal current IN 100 A Nominal voltage UN 600 V UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 2 Nominal current IN 127 A Nominal voltage UN 600 V  E118976 Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 04/10/2017   Page 4 / 4