1418052

https://www.phoenixcontact.com/us/products/1418052 Power connectors - SACC-M12FST-4CON-PG 9-M - 1418052 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Power connectors, 4-position, Socket straight M12, T-coded, Screw connection, Knurl material: Zinc die-cast, nickel-plated, Cable gland Pg9, External cable diameter 6 mm ... 8 mm, for direct current up to 12 A/60 V The figure shows the version with Pg11 screw connection Why buy this product ■ ■ ■ ■ ■ Safe use in the field, thanks to a high degree of protection Flexible: connectors for on-site assembly Screw connection: proven connection technology for a large selection of different conductors High-performance: DC connectors for up to 12 A and 60 V DC Protection against incorrect connection using special T-coding Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 20.0 g Custom tariff number 85369010 Country of origin Germany Technical data Dimensions External cable diameter 6 mm ... 8 mm Ambient conditions Degree of protection IP67 General Note Strip 22 mm off the cable sheath, strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductor with 08/16/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1418052 Power connectors - SACC-M12FST-4CON-PG 9-M - 1418052 Technical data General shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. Rated current at 40°C 12 A (When using 1.5 mm² conductors) Rated voltage 63 V DC Number of positions 4 Insulation resistance > 10 GΩ Coding T power Standards/regulations IEC 61076-2-111 Status display No Overvoltage category III Degree of pollution 3 Connection method Screw connection Conductor cross section 0.75 mm² ... 1.5 mm² Conductor cross section AWG 18 ... 16 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.8 Nm ... 1 Nm (Pressure screw with sleeve housing) 0.4 Nm (Screw plug insert with sleeve housing as far it will go) 0.2 Nm (Screw terminal blocks) Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Material of grip body PA Material, knurls Zinc die-cast, nickel-plated Sealing material Viton (M12 socket) NBR (Cable clamping) Cable Standards/specifications IEC 61076-2-111 Standards and Regulations Standards/regulations IEC 61076-2-111 Flammability rating according to UL 94 V0 Drawings 08/16/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1418052 Power connectors - SACC-M12FST-4CON-PG 9-M - 1418052 Dimensional drawing Schematic diagram 4 1 M12 x 1 socket, straight Pin assignment of M12 socket, 4-pos., T-coded, socket side view 3 2 Classifications eCl@ss eCl@ss 5.1 27143423 eCl@ss 8.0 27440104 ETIM ETIM 5.0 EC002635 Accessories Accessories Connector Ferrule - A 1,5 - 7 - 3200263 Ferrule, Length: 7 mm, Color: silver     Crimping tool Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry     Protective cap 08/16/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1418052 Power connectors - SACC-M12FST-4CON-PG 9-M - 1418052 Accessories Screw plug - PROT-M12 MS-PA-CHAIN - 1430899 M12 sealing cap with fixing band, for sensor cables, for free M12 sockets     Screwdriver tools Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive     Stripping tool Stripping tool - WIREFOX 6SC - 1212158 Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade     Torque tool 08/16/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1418052 Power connectors - SACC-M12FST-4CON-PG 9-M - 1418052 Accessories Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/16/2016   Page 5 / 5