1419399

Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Device connector, rear mounting, Universal, 4-position, PUR, black-gray RAL 7021, shielded, Flush-type male connector, straight, M12-SPEEDCON, A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 1 m, PUR halogen-free black item no.: 1239252 Your advantages • Pre-assembled with cables in various standard lengths for immediate use • Customer-specific assemblies and cable lengths can be supplied • Sealed on the cable side for optimum tightness of seal • For high transmission safety: shield connection to the housing with optional EMC nut Commercial Data Item number 1419399 Packing unit 1 pc Minimum order quantity 1 pc Note Made to Order (non-returnable) Sales Key A11 Product Key ABQCEC Catalog Page Page 51 (C-2-2019) GTIN 4046356533249 Weight per Piece (including packing) 73.8 g Weight per Piece (excluding packing) 60 g Customs tariff number 85444290 Country of origin DE Dec 21, 2022, 5:21 PM Page 1 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 Technical Data Notes Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Safety note Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. • The products are suitable for applications in plant, controller, and electrical device engineering. • When operating the connectors in outdoor applications, they must be separately protected against environmental influences. • Assembled products may not be manipulated or improperly opened. • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). • When using the product in direct connection with third-party manufacturers, the user is responsible. • For operating voltages > 50 V AC, conductive connector housings must be grounded • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product • Only use tools recommended by Phoenix Contact • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products Dec 21, 2022, 5:21 PM Page 2 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 • Ensure that the protective or functional ground has been properly connected. • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Rear mounting M16 x 1.5 With flat nut Assembly instructions With flat nut Product properties Product type Circular connectors (device side) Number of positions 4 No. of cable outlets 1 Shielded yes Coding A - standard Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Sealing material NBR Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material for screw connection Zinc die-cast, nickel-plated Electrical properties Rated surge voltage 2.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Nominal voltage UN 250 V Nominal current IN 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) Transmission medium Copper Connection data Conductor connection Connection method Cable connection Dec 21, 2022, 5:21 PM Page 3 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 Type of contact Crimp contacts Tightening torque 3 Nm 4 Nm Connector Connection 1 Head design Flush-type male connector Head cable outlet straight Head thread type M12 Head locking type SPEEDCON Coding A Connection 2 Head design free cable end Cable / line Cable length 1m PUR halogen-free black [PUR] Dimensional drawing Cable weight 36 kg/km UL AWM Style 20549 / 10493 (80°C/300 V) Number of positions 4 Shielded yes Cable type PUR halogen-free black [PUR] Conductor structure signal line 42x 0.10 mm AWG signal line 22 Conductor cross section 4x 0.34 mm² (Signal line) Wire diameter incl. insulation 1.27 mm ±0.02 mm (Signal line) External cable diameter 4.95 mm ±0.2 mm Outer sheath, material PUR External sheath, color black-gray RAL 7021 Conductor material Bare Cu litz wires Material wire insulation PP Single wire, color brown, white, blue, black Thickness, insulation ≥ 0.21 mm Dec 21, 2022, 5:21 PM Page 4 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 Thickness, outer sheath approx. 0.5 mm Overall twist 4 wires, twisted Optical shield covering 80 % Max. conductor resistance max. 58 Ω/km (at 20 °C) Insulation resistance ≥ 100 GΩ*km (at 20 °C) Wave impedance ≥ 62 Ω (f = 10 MHz) Cable capacity ≤ 80 pF/m (Conductor-Conductor) ≤ 135 pF/m (Wire/shield) Nominal voltage, cable ≤ 300 V Test voltage ≥ 3000 V Minimum bending radius, fixed installation 5xD Minimum bending radius, flexible installation 10 x D Max. bending cycles 10000000 Halogen-free in accordance with DIN VDE 0472 part 815 in accordance with DIN EN 50267-2-1 Flame resistance in accordance with UL 758/1581 FT2 DIN EN 60332-2-2 (20 s) Resistance to oil in accordance with DIN EN 60811-2-1 Other resistance Highly resistant to acids, alkaline solutions and solvents hydrolysis and microbe resistant Resistant to salt water partly UV-resistant in accordance with DIN EN ISO 4892-2-A abrasion-resistant Special properties Flexible cable conduit capable Silicone-free Free of substances which would hinder coating with paint or varnish Low adhesion surface Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation) -25 °C ... 80 °C (Cable, flexible installation) Ambient conditions Degree of protection IP67 (When plugged in) IP65 (When plugged in) Degree of protection IP65/IP67 Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Standards and regulations M12 Standards/specifications IEC 61076-2-101 Dec 21, 2022, 5:21 PM Page 5 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 Drawings Schematic diagram 4 3 1 2 Pin assignment of M12 male connector, 4-pos., A-coded, view of connector side Dec 21, 2022, 5:21 PM Page 6 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 Dimensional drawing Ø15,9 ⁰,¹ 4,5 13,5 ⁰,¹ Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) Dec 21, 2022, 5:21 PM Page 7 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 Circuit diagram 1 BN 2 WH 4 BK 3 BU Dimensional drawing 23 41,5 2 M12 M16x1,5 1,5 10,7 19 17 M12 flush-type connector Dec 21, 2022, 5:21 PM Page 8 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 I [A] Diagram 9 8 7 6 5 4 3 2 1 0 1 1 0 2 = 4x0,34mm 10 20 30 40 50 60 70 80 90 100 110 120 130 [°C] I = current strength, T = ambient temperature Dec 21, 2022, 5:21 PM Page 9 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 Approvals EAC  Approval ID: B.01687   cUL Recognized Approval ID: E221474-20220908 Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2 250 V 1.5 A - - Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2 250 V 4A - - UL Recognized Approval ID: E221474-20220908 cULus Recognized Dec 21, 2022, 5:21 PM Page 10 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 Classifications ECLASS ECLASS-9.0 27440102 ECLASS-10.0.1 27440102 ECLASS-11.0 27440102 ETIM ETIM 8.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Dec 21, 2022, 5:21 PM Page 11 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Dec 21, 2022, 5:21 PM Page 12 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 Accessories Screw plug Screw plug - SACC-M16-SEALING PLUG SET - 1453368 https://www.phoenixcontact.com/us/products/1453368 Screw plug, Rear mounting, M16 x 1.5 item no.: 1239800 Sealing cap Sealing cap - PROT-M12 FS - 1560251 https://www.phoenixcontact.com/us/products/1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flushtype plugs and I/O devices in the field Dec 21, 2022, 5:21 PM Page 13 (14) Device connector, rear mounting - SACCBP-MS4CON-M16/1,0-PUR SCO 1419399 https://www.phoenixcontact.com/us/products/1419399 Sealing cap Sealing cap - PROT-M12 FS-M - 1430488 https://www.phoenixcontact.com/us/products/1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field Flat gasket Flat gasket - SACC-M16-SEAL CLM - 1430394 https://www.phoenixcontact.com/us/products/1430394 M16 flat gasket for M12 flush-type connectors with M16 fastening thread Phoenix Contact 2022 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Dec 21, 2022, 5:21 PM Page 14 (14)