1419409

https://www.phoenixcontact.com/us/products/1419409 Flush-type connector - SACCBP-MS-5CON-M16/1,0-PUR SCO - 1419409 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type plug, shielded, 5-pos., M12, A-coded, rear/screw mounting with M16 thread, with 1 m cable, 5 x 0.34 mm² Your advantages  Pre-assembled with cables in various standard lengths for immediate use  Customer-specific assemblies and cable lengths can be supplied  Sealed on the cable side for optimum tightness of seal  For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356533287 Weight per Piece (excluding packing) 80.000 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 1m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP65/IP67 09/09/2019   Page 1 / 10 https://www.phoenixcontact.com/us/products/1419409 Flush-type connector - SACCBP-MS-5CON-M16/1,0-PUR SCO - 1419409 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 60 V Rated surge voltage 1.5 kV Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M16 x 1.5 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Cable type PUR halogen-free black Cable type (abbreviation) PUR Cable abbreviation LiF9YC11Y Conductor cross section 5x 0.34 mm² (Signal line) AWG signal line 22 Conductor structure signal line 42x 0.10 mm Core diameter including insulation 1.27 mm ±0.02 mm (Signal line) Thickness, insulation approx. 0.21 mm (Core insulation) approx. 0.8 mm (Outer cable sheath) Wire colors Brown, white, blue, black, gray Overall twist 5 wires around filler to the core 09/09/2019   Page 2 / 10 https://www.phoenixcontact.com/us/products/1419409 Flush-type connector - SACCBP-MS-5CON-M16/1,0-PUR SCO - 1419409 Technical data Cable Shielding Braided copper wires Optical shield covering 80 % External sheath, color black-gray RAL 7021 External cable diameter D 5.25 mm ±0.2 mm Smallest bending radius, fixed installation 26 mm Smallest bending radius, movable installation 52 mm (up to +60°C) Number of bending cycles 10000000 Bending radius 52 mm Traversing path 10 m Traversing rate 3 m/s Acceleration 10 m/s² Cable weight 48 kg/km Outer sheath, material PUR Conductor material Bare Cu litz wires Standards/specifications M12 connector IEC 61076-2-101 Insulation resistance 70 GΩ*km (at 20 °C) Conductor resistance max. 57 Ω/km (at 20 °C) Nominal voltage, cable 300 V (at 20 °C) Test voltage, cable 3000 V Test voltage Core/Core 3000 V (at 20 °C) Special properties Flexible cable conduit capable Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 09/09/2019   Page 3 / 10 https://www.phoenixcontact.com/us/products/1419409 Flush-type connector - SACCBP-MS-5CON-M16/1,0-PUR SCO - 1419409 Dimensional drawing Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) 09/09/2019   Page 4 / 10 https://www.phoenixcontact.com/us/products/1419409 Flush-type connector - SACCBP-MS-5CON-M16/1,0-PUR SCO - 1419409 Dimensional drawing M12 flush-type connector 09/09/2019   Page 5 / 10 https://www.phoenixcontact.com/us/products/1419409 Flush-type connector - SACCBP-MS-5CON-M16/1,0-PUR SCO - 1419409 Circuit diagram Contact assignment of the M12 plugs 09/09/2019   Page 6 / 10 https://www.phoenixcontact.com/us/products/1419409 Flush-type connector - SACCBP-MS-5CON-M16/1,0-PUR SCO - 1419409 Schematic diagram Pin assignment M12 connector, 5-pos., A-coded, socket side view 09/09/2019   Page 7 / 10 https://www.phoenixcontact.com/us/products/1419409 Flush-type connector - SACCBP-MS-5CON-M16/1,0-PUR SCO - 1419409 Cable cross section PUR halogen-free black [PUR] Classifications eCl@ss eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 09/09/2019   Page 8 / 10 https://www.phoenixcontact.com/us/products/1419409 Flush-type connector - SACCBP-MS-5CON-M16/1,0-PUR SCO - 1419409 Classifications eCl@ss eCl@ss 9.0 27440102 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC      B.00767 Accessories Accessories Plug for cable screw gland 09/09/2019   Page 9 / 10 https://www.phoenixcontact.com/us/products/1419409 Flush-type connector - SACCBP-MS-5CON-M16/1,0-PUR SCO - 1419409 Accessories Screw plug - SACC-M16-SEALING PLUG SET - 1453368 M16 screw plug for unused M12 housing cutouts     Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 09/09/2019   Page 10 / 10