1419425

https://www.phoenixcontact.com/us/products/1419425 Flush-type connector - SACCBP-MS-8CON-M16/1,0-PUR SCO - 1419425 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type plug, shielded, 8-pos., M12, A-coded, rear/screw mounting with M16 thread, with 1 m cable, 8 x 0.25 mm² Your advantages  Pre-assembled with cables in various standard lengths for immediate use  Customer-specific assemblies and cable lengths can be supplied  Sealed on the cable side for optimum tightness of seal  For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356533324 Weight per Piece (excluding packing) 80.000 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 1m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 07/30/2019   Page 1 / 5 https://www.phoenixcontact.com/us/products/1419425 Flush-type connector - SACCBP-MS-8CON-M16/1,0-PUR SCO - 1419425 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M16 x 1.5 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Cable type PUR halogen-free black Cable abbreviation Li9Y-V1-C-V1-11Y Conductor cross section 0.25 mm² AWG signal line 24 Conductor structure signal line 14x 0.15 mm Core diameter including insulation 1.15 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Brown, white, green, yellow, gray, pink, blue, red Overall twist 8 wires around filler to the core Shielding Braided copper wires Optical shield covering 85 % 07/30/2019   Page 2 / 5 https://www.phoenixcontact.com/us/products/1419425 Flush-type connector - SACCBP-MS-8CON-M16/1,0-PUR SCO - 1419425 Technical data Cable External sheath, color black-gray RAL 7021 External cable diameter 5.90 mm Cable weight 54 kg/km Outer sheath, material PUR Material, filler PE Conductor material Bare Cu litz wires Standards/specifications M12 connector IEC 61076-2-101 Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 07/30/2019   Page 3 / 5 https://www.phoenixcontact.com/us/products/1419425 Flush-type connector - SACCBP-MS-8CON-M16/1,0-PUR SCO - 1419425 Classifications UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC Ex Approvals Approval details  EAC     B.00767 Accessories Accessories Plug for cable screw gland Screw plug - SACC-M16-SEALING PLUG SET - 1453368 M16 screw plug for unused M12 housing cutouts     Protective cap 07/30/2019   Page 4 / 5 https://www.phoenixcontact.com/us/products/1419425 Flush-type connector - SACCBP-MS-8CON-M16/1,0-PUR SCO - 1419425 Accessories Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Seal Flat gasket - SACC-M16-SEAL CLM - 1430394 M16 flat gasket, for rear mounting of M12 flush-type connectors with M16 fastening thread     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 07/30/2019   Page 5 / 5