1419642

https://www.phoenixcontact.com/us/products/1419642 Power connectors - SACC-M12FRS-2PECON-PG 9-M - 1419642 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Power connectors, 3-position, Socket angled M12, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm, for AC current up to 16 A/230 V Your advantages  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Screw connection: proven connection technology for a large selection of different conductors  High-performance: AC connectors for up to 16 A and 230 V AC  Protection against incorrect connection using special S-coding Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626181806 Weight per Piece (excluding packing) 30.000 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Wrench size, union nut 16 mm Diameter housing 20 mm Length 35 mm External cable diameter 6 mm ... 8 mm Stripping length of the sheath 20 mm 07/30/2019   Page 1 / 6 https://www.phoenixcontact.com/us/products/1419642 Power connectors - SACC-M12FRS-2PECON-PG 9-M - 1419642 Technical data Dimensions Stripping length of the individual wire 5 mm Ambient conditions Degree of protection IP67 General Note Strip 21 mm off the cable sheath, strip 6 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Conductor length with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Rated current at 40°C 16 A (when using 1.5 mm² conductors) 16 A (at 40 °C) Rated voltage 230 V AC Number of positions 3 Color handle area black Insulation resistance > 10 GΩ Coding S power Standards/regulations M12 connector IEC 61076-2-111 Status display No Overvoltage category III Degree of pollution 3 Connection method Screw connection Conductor cross section 0.75 mm² ... 1.5 mm² (without ferrule) 0.75 mm² ... 1.5 mm² (with ferrule) 0.75 mm² ... 1.5 mm² (solid) Conductor cross section AWG 18 ... 16 (without ferrule) 18 ... 16 (with ferrule) Insertion/withdrawal cycles > 100 Torque 0.4 Nm (M12 knurl) 0.8 Nm ... 1 Nm (Pressure screw with sleeve housing) 0.4 Nm (Screw plug insert with sleeve housing as far it will go) 0.2 Nm (Screw terminal blocks) Assembly instructions The wires can be connected both with ferrules and without ferrules The connector pin assignment can be rotated 90° to the cable outlet Material Flammability rating according to UL 94 V0 07/30/2019   Page 2 / 6 https://www.phoenixcontact.com/us/products/1419642 Power connectors - SACC-M12FRS-2PECON-PG 9-M - 1419642 Technical data Material Contact material CuZn Contact surface material Au Contact carrier material PA Material of grip body PA Material, knurls Zinc die-cast, nickel-plated Sealing material Viton (M12 socket) NBR (Cable clamping) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-111 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Classifications eCl@ss eCl@ss 5.1 27143423 eCl@ss 6.0 27279200 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 5.0 EC002635 ETIM 6.0 EC002635 ETIM 7.0 EC002635 Approvals Approvals Approvals EAC 07/30/2019   Page 3 / 6 https://www.phoenixcontact.com/us/products/1419642 Power connectors - SACC-M12FRS-2PECON-PG 9-M - 1419642 Approvals Ex Approvals Approval details  EAC     EAC-Zulassung Accessories Accessories Cable end sleeve Ferrule - AI 1,5 - 6 BK - 3200755 Ferrule, sleeve length: 6 mm, length: 12 mm, color: black     Crimping tool Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry     Protective cap Screw plug - PROT-M12 MS-PA-CHAIN - 1430899 M12 sealing cap with fixing band, for sensor cables, for free M12 sockets     07/30/2019   Page 4 / 6 https://www.phoenixcontact.com/us/products/1419642 Power connectors - SACC-M12FRS-2PECON-PG 9-M - 1419642 Accessories Screwdriver tools Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive     Stripping tool Stripping tool - WIREFOX 6SC - 1212158 Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     07/30/2019   Page 5 / 6 https://www.phoenixcontact.com/us/products/1419642 Power connectors - SACC-M12FRS-2PECON-PG 9-M - 1419642 Accessories Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 07/30/2019   Page 6 / 6