1419645

https://www.phoenixcontact.com/us/products/1419645 Flush-type connector - SACC-DSI-M12MS-5CON-M16/0,5 - 1419645 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type plug, 5-pos., M12 SPEEDCON, A-coded, rear/screw mounting with M16 thread, with 0.5 m TPE litz wire, 5 x 0.34 mm²     Key commercial data Packing unit 11 Weight per Piece (excluding packing) 20.0 GRM Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Degree of protection IP65 IP67 General Rated current at 40°C 4A Rated voltage 60 V Number of positions 5 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Surge voltage category II 28.10.2013   Page 1 / 5 https://www.phoenixcontact.com/us/products/1419645 Flush-type connector - SACC-DSI-M12MS-5CON-M16/0,5 - 1419645 Technical data General Pollution degree 3 Connection method Individual wires Mounting type Rear mounting M16 x 1.5 With flat nut Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Cable type TPE litz wire Conductor cross section 0.34 mm² AWG signal line 22 Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Black, brown,blue, white, gray Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 ETIM ETIM 2.0 EC001297 28.10.2013   Page 2 / 5 https://www.phoenixcontact.com/us/products/1419645 Flush-type connector - SACC-DSI-M12MS-5CON-M16/0,5 - 1419645 Classifications ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Recognized / GOST / GOST Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 60 V GOST  28.10.2013   Page 3 / 5 https://www.phoenixcontact.com/us/products/1419645 Flush-type connector - SACC-DSI-M12MS-5CON-M16/0,5 - 1419645 Approvals GOST  Drawings Dimensioned drawing Dimensioned drawing Ø16,1 Ø17 +0,2 M16x1,5 45 ° max.4,5 Housing cutout for M16 fastening thread, mounting panel with thread 13,5 +0,1 1x45° Housing cutout for M16 fastening thread, mounting panel with feedthrough hole (alternatively with surface as protection against rotation) Schematic diagram 23 3 11 10 17 2 18 1 2 M12x1 500 5 Pin assignment M12 male connector, 5-pos., A-coded, male side M16x1,5 4 Dimensioned drawing max. 4,5 M12 flush-type plug Circuit diagram 1 BN 2 WH 4 BK 3 BU 5 GY Contact assignment of the M12 plug 28.10.2013   Page 4 / 5 https://www.phoenixcontact.com/us/products/1419645 © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 28.10.2013   Page 5 / 5