1419658

https://www.phoenixcontact.com/us/produkte/1419658 Flush-type connector - SACC-DSI-M12FS-5CON-M16/0,5 - 1419658 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type socket, 5-pos., M12 SPEEDCON, A-coded, rear/screw mounting with M16 thread, with 0.5 m TPE litz wire, 5 x 0.34 mm²     Key commercial data Packing unit 1 PCE Catalog page Page 44 (PC-2011) GTIN Custom tariff number 85444290 Country of origin GERMANY Technical data General data Rated current at 40°C 4A Rated voltage 60 V Number of positions 5 Volume resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Length of cable 0.5 m Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) General characteristics Standards/regulations M12 plug-in connector IEC 61076-2-101 Coding A - standard Surge voltage category II Pollution degree 3 11.04.2013   Page 1 / 4 https://www.phoenixcontact.com/us/produkte/1419658 Flush-type connector - SACC-DSI-M12FS-5CON-M16/0,5 - 1419658 Technical data General characteristics Degree of protection IP65/67 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Mounting type Rear mounting M16 x 1.5 With flat nut Connection method Individual wires Status display No Conductor data Cable type TPE litz wire Conductor cross section 0.34 mm² AWG signal line 22 Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Black, brown,blue, white, gray Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, conductor 300 V Test voltage, conductor 2000 V AC Ambient temperature (operation) -25 °C ... 85 °C (cable, fixed installation) Classifications ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 11.04.2013   Page 2 / 4 https://www.phoenixcontact.com/us/produkte/1419658 Flush-type connector - SACC-DSI-M12FS-5CON-M16/0,5 - 1419658 Classifications UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 Drawings Dimensioned drawing Dimensioned drawing Ø16,1 Ø17 +0,2 M16x1,5 45 ° max.4,5 Housing cutout for M16 fastening thread, mounting panel with thread 13,5 +0,1 1x45° Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) Schematic diagram 18 4 6,5 1 18 2 Pin assignment M12 socket, 5-pos., A-coded, socket side view M16x1,5 5 9,5 2 500 17 3 Dimensioned drawing max. 4,5 11.04.2013   Page 3 / 4 https://www.phoenixcontact.com/us/produkte/1419658 Flush-type connector - SACC-DSI-M12FS-5CON-M16/0,5 - 1419658 Circuit diagram 1 BN 2 WH 4 BK 3 BU 5 GY Contact assignment of the M12 socket © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 11.04.2013   Page 4 / 4