1419687

https://www.phoenixcontact.com/us/products/1419687 Flush-type connector - SACC-DSI-M12MS-8CON-M16/0,5 - 1419687 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type plug, 8-pos., M12 SPEEDCON, rear/screw mounting with M16 thread, with 0.5 m TPE litz wire, 8 x 0.25 mm²     Key commercial data Packing unit 11 Weight per Piece (excluding packing) 20.0 GRM Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Degree of protection IP65 IP67 General Rated current at 40°C 2A Rated voltage 30 V Number of positions 8 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Surge voltage category II 28.10.2013   Page 1 / 5 https://www.phoenixcontact.com/us/products/1419687 Flush-type connector - SACC-DSI-M12MS-8CON-M16/0,5 - 1419687 Technical data General Pollution degree 3 Connection method Individual wires Mounting type Rear mounting M16 x 1.5 With flat nut Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Cable type TPE litz wire Conductor cross section 0.25 mm² AWG signal line 24 Conductor structure signal line 14x 0.15 mm Core diameter including insulation 1.15 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Brown, blue, white, gray, pink, red, yellow, green Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 80 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 28.10.2013   Page 2 / 5 https://www.phoenixcontact.com/us/products/1419687 Flush-type connector - SACC-DSI-M12MS-8CON-M16/0,5 - 1419687 Classifications ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Recognized / GOST / GOST Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 2A Nominal voltage UN 30 V 28.10.2013   Page 3 / 5 https://www.phoenixcontact.com/us/products/1419687 Flush-type connector - SACC-DSI-M12MS-8CON-M16/0,5 - 1419687 Approvals GOST  GOST  Drawings Dimensioned drawing Dimensioned drawing Ø16,1 Ø17 +0,2 M16x1,5 45 ° max.4,5 Housing cutout for M16 fastening thread, mounting panel with thread 13,5 +0,1 1x45° Housing cutout for M16 fastening thread, mounting panel with feedthrough hole (alternatively with surface as protection against rotation) Schematic diagram Dimensioned drawing 5 23 6 4 8 10 11 M12x1 2 Pin assignment M12 plug, 8-pos., view plug side M16x1,5 3 18 1 2 17 7 500 max. 4,5 28.10.2013   Page 4 / 5 https://www.phoenixcontact.com/us/products/1419687 Flush-type connector - SACC-DSI-M12MS-8CON-M16/0,5 - 1419687 Circuit diagram 1 WH 2 BN 3 GN 4 YE 5 GY 6 PK 7 BU 8 RD Contact assignment of the M12 plug © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 28.10.2013   Page 5 / 5