1419690

https://www.phoenixcontact.com/us/products/1419690 Flush-type connector - SACC-DSI-M12FS-8CON-M16/0,5 - 1419690 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type socket, 8-pos., M12 SPEEDCON, rear/screw mounting with M16 thread, with 0.5 m TPE litz wire, 8 x 0.25 mm² Why buy this product  Pre-assembled with litz wires for immediate use  Customer-specific assemblies and litz wire lengths available  Sealed on the litz wire side for optimum leak-tightness  All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design  For high transmission safety: shield connection to the housing with optional EMC nut  SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 40.000 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP65 IP67 General 10/23/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1419690 Flush-type connector - SACC-DSI-M12FS-8CON-M16/0,5 - 1419690 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Signal type/category Universal Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M16 x 1.5 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Cable type TPE litz wire Conductor cross section 0.25 mm² AWG signal line 24 Conductor structure signal line 14x 0.15 mm Core diameter including insulation 1.15 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Brown, blue, white, gray, pink, red, yellow, green Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Standards/specifications M12 connector IEC 61076-2-101 10/23/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1419690 Flush-type connector - SACC-DSI-M12FS-8CON-M16/0,5 - 1419690 Technical data Cable Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 80 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing ° max.4,5 Housing cutout for M16 fastening thread, mounting panel with thread Ø16,1 M16x1,5 45 Ø17 +0,2 Dimensional drawing 13,5 +0,1 1x45° Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with area as anti-rotation protection for panel thicknesses > 2 mm up to max. 4.5 mm) 10/23/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1419690 Flush-type connector - SACC-DSI-M12FS-8CON-M16/0,5 - 1419690 Schematic diagram Dimensional drawing 19,6 Pin assignment M12 socket, 8-pos., A-coded, view female side 10 2 500 17 M16x1,5 18 7,6 max. 4,5 M12 flush-type socket Circuit diagram 1 WH 2 BN 3 GN 4 YE 5 GY 6 PK 7 BU 8 RD Contact assignment of the M12 socket Approvals Approvals Approvals UL Recognized / EAC Ex Approvals Approval details UL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 118976     mm²/AWG/kcmil 26-20 Nominal current IN 2A Nominal voltage UN 30 V 10/23/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1419690 Flush-type connector - SACC-DSI-M12FS-8CON-M16/0,5 - 1419690 Approvals EAC   B.00767 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 10/23/2016   Page 5 / 5