1419726

https://www.phoenixcontact.com/us/products/1419726 Flush-type connector - SACC-DSI-M12MS-17CON-M16/0,5 - 1419726 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 17-pos., M12 SPEEDCON, rear/screw mounting with M16 thread, with 0.5 m halogen-free TPE litz wire, 17 x 0.14 mm²     Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 40.0 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 1.5 A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 17 Insulation resistance ≥ 100 MΩ 02/01/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1419726 Flush-type connector - SACC-DSI-M12MS-17CON-M16/0,5 - 1419726 Technical data General Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M16 x 1.5 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Cable type TPE litz wire Conductor cross section 0.14 mm² AWG signal line 26 Conductor structure signal line 7x 0.16 mm Core diameter including insulation 1.1 mm ±0.05 mm Thickness, insulation 0.21 mm (Core insulation) Wire colors brown, blue, white, green, pink, yellow, black, gray, red, violet, gray/pink, red/blue, white/green, brown/green, white/yellow, yellow/brown, white/gray Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 02/01/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1419726 Flush-type connector - SACC-DSI-M12MS-17CON-M16/0,5 - 1419726 Technical data Standards and Regulations Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC Ex Approvals Approvals submitted 02/01/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1419726 Flush-type connector - SACC-DSI-M12MS-17CON-M16/0,5 - 1419726 Approvals Approval details EAC  Drawings Dimensional drawing Dimensional drawing Ø16,1 M16x1,5 Ø17 +0,2 45 ° max.4,5 Housing cutout for M16 fastening thread, mounting panel with thread 13,5 +0,1 1x45° Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with area as anti-rotation protection for panel thicknesses > 2 mm up to max. 4.5 mm) Schematic diagram Dimensional drawing 13 3 2 12 4 17 1 5 11 14 10 6 15 9 7 8 16 23 11 M12x1 10 Pin assignment M12 male connector, 17-pos., male side view M16x1,5 2 17 18 500 max. 4,5 M12 flush-type plug Circuit diagram 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 BN BU WH GN PK YE BK GY RD VT GYPK RDBU WHGN BNGN WHYE YEBN WHGY Contact assignment of the M12 plug 02/01/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1419726 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 02/01/2016   Page 5 / 5