1419742

SACC-DSI-M12MS-4CON-M16 - Device connector rear mounting 1419742 https://www.phoenixcontact.com/us/products/1419742 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector rear mounting, 4-position, Pin, straight, M12, coding: A, Rear mounting, M16 x 1.5, Solder pins, Alternative product in accordance with RoHS II without Exemption 6c (Pb IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Order information: Lock nut is included in the scope of delivery Mounting Mounting type Rear mounting M16 x 1.5 With flat nut Assembly note With flat nut Product properties Product type Circular connectors (device side) Number of positions 4 Shielded no Coding A Thread type M12 Data management status Article revision 07 Insulation characteristics Overvoltage category II Degree of pollution 3 Dimensions Length of the solder pin 6 mm 6 mm Material specifications Flammability rating according to UL 94 V0 Seal material NBR Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material for screw connection Zinc die-cast, nickel-plated Electrical properties Rated surge voltage 2.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Oct 15, 2024, 12:39 AM Page 2 (7) SACC-DSI-M12MS-4CON-M16 - Device connector rear mounting 1419742 https://www.phoenixcontact.com/us/products/1419742 Nominal voltage UN 250 V Nominal current IN 4A Connection data Conductor connection Connection method Solder pins Contact connection type Pin Tightening torque 3 Nm ... 4 Nm (Installation-side) Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Pin Head cable outlet straight Head thread type M12 Coding A Cable/line Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (Cable, flexible installation) Environmental and real-life conditions Ambient conditions Degree of protection IP67 (When plugged in) IP65 (When plugged in) IP65/IP67 Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) -25 °C ... 85 °C (Cable, flexible installation) -40 °C ... 85 °C (cable, fixed installation) Standards and regulations Standard designation M12 connector Standards/specifications IEC 61076-2-101 Oct 15, 2024, 12:39 AM Page 3 (7) SACC-DSI-M12MS-4CON-M16 - Device connector rear mounting 1419742 https://www.phoenixcontact.com/us/products/1419742 Drawings Schematic diagram 4 3 1 2 Pin assignment M12 plug, 4-pos., A-coded, view plug side Oct 15, 2024, 12:39 AM Page 4 (7) SACC-DSI-M12MS-4CON-M16 - Device connector rear mounting 1419742 https://www.phoenixcontact.com/us/products/1419742 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1419742    cUL Recognized Approval ID: E118976-20100522 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 250 V 4A 22 - 22 - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 250 V 4A 22 - 22 - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 250 V 4A 22 - 20 - UL Recognized Approval ID: E118976-20100522 cULus Recognized Approval ID: E221474-20140616 cULus Recognized Oct 15, 2024, 12:39 AM Page 5 (7) SACC-DSI-M12MS-4CON-M16 - Device connector rear mounting 1419742 https://www.phoenixcontact.com/us/products/1419742 Classifications ECLASS ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Oct 15, 2024, 12:39 AM Page 6 (7) SACC-DSI-M12MS-4CON-M16 - Device connector rear mounting 1419742 https://www.phoenixcontact.com/us/products/1419742 Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(c) China RoHS Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP d5316b2d-e7f3-4e07-9661-7a2a9af5288f Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Oct 15, 2024, 12:39 AM Page 7 (7)