1420056

https://www.phoenixcontact.com/us/products/1420056 Housing - HC-ADV-B24-HHWH-BLANK-ELC-AL - 1420056 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) HEAVYCON ADVANCE sleeve housing, B24, with stainless steel screw locking (Allen screw), salt-water-resistant aluminum, height 93.7 mm, with thread, 1x M32 straight cable outlet, without surface; conductive seal (EMC properties) Key Commercial Data Packing unit 1 STK Custom tariff number 85389099 Country of origin China Technical data Dimensions Height 74 mm Width 57 mm Length 152 mm Length of the assembly cutout 112 mm Width of the assembly cutout 35 mm Ambient conditions Degree of protection of housing (IP) IP66 IP68 (0.2 bar/24 h) IP69K (ISO 20653:2013-02) Degree of protection of housing (NEMA) 4 4X 6P 12 Ambient temperature (operation) -40 °C ... 125 °C 08/16/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1420056 Housing - HC-ADV-B24-HHWH-BLANK-ELC-AL - 1420056 Technical data General Size B24 Housing type Sleeve housing Locking type Screw locking Fixing screws M6 (screw head: 5 mm Allen screw) Screw connection none Housing material Die-cast aluminum, salt water resistant Housing surface material Uncoated Seal material NBR, conductive Material lock Stainless steel Assembly instructions In order to guarantee that the ground conductor contact functions even when plugged in at an angle, the two panel mounting flanges must have sufficient electrical contact with the metal mounting panel. Connection To ensure optimum shielding, any insulating power coating must be removed from the profile gasket area on the control cabinet panel. Tightening torque of locking screw: 3 Nm. Drawings Dimensional drawing Dimensional drawing 130 35 32 93,7 112 Ø4,51) Ø3,62) 152 57 Dimensional drawing Mounting cutout 1) when M4 screws are used 2) when self-tapping Torx® screws are used (Torx® 20, M4) 08/16/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1420056 Housing - HC-ADV-B24-HHWH-BLANK-ELC-AL - 1420056 Diagram Shield attenuation [dB] 80 70 60 50 40 30 20 10 0 30M 40M 50M 70M 100M 200M 300M 400M Frequency [Hz] 600M 1G Shield attenuation Classifications eCl@ss eCl@ss 5.1 27260701 eCl@ss 8.0 27440202 eCl@ss 9.0 27440202 ETIM ETIM 5.0 EC000437 Approvals Approvals Approvals EAC Ex Approvals Approvals submitted Approval details EAC  08/16/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1420056 Housing - HC-ADV-B24-HHWH-BLANK-ELC-AL - 1420056 Accessories Accessories Labeled device marker Plastic label - US-EMLP (20X9) CUS - 0830085 Plastic label, can be ordered: By card, white, labeled according to customer specifications, Mounting type: Adhesive, Lettering field: 20 x 9 mm     Panel mounting flange Mounting flange - HC-B-AF - 1686533 Panel mounting flange for HEAVYCON-ADVANCE TMS housing with screw locking     Mounting flange - HC-B-AF-SET - 1604638 ® Panel mounting flange for screw locking, set comprising 2 panel mounting flanges with 4 self-tapping screws (M4, Torx ) and 4 fan-type washers     Protective cover Protective covers - HC-B 24-TMS-SD-IP50 - 1690765 Protective cover B24, Clip locking, Protective cover material: PA, Seal: no, With lanyard, Diameter of retaining cord eyelet: 4 mm     08/16/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1420056 Housing - HC-ADV-B24-HHWH-BLANK-ELC-AL - 1420056 Accessories Protective covers - HC-B 24-TMS-SD-IP65 - 1690804 HEAVYCON ADVANCE B24 IP65 protective cover, for panel mounting side, with screw locking, with retaining cord, diameter of retaining cord eyelet: 3 mm     Screwdriver tools Screwdriver - SF-BIT-HEXB 5-89 - 1208911 Screw bit, hexagonal with ball head, E6.3-1/4" drive, size: Hex 5 x 89 mm, hardened, suitable for holder according to DIN 3126-F 6.3/ISO 1173     Screwdriver - SF-M BH - 1212070 Bit screwdriver, with 1/4" quick-action chuck, handle length 119 mm, 2-component handle, with non-slip grip, suitable for bits according to DIN 3126-C 6.3 and E 6.3/ISO 1173, magnetic     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/16/2016   Page 5 / 5