1421876

https://www.phoenixcontact.com/us/products/1421876 RJ45 connector - CUC-IND-C1ZNI-B/R4IE8 - 1421876 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) RJ45 connector, Degree of protection: IP20, Number of positions: 8, 1 Gbps, CAT5 (IEC 11801:2002), Material: Zinc die-cast, Connection method: IDC fast connection, Connection cross section: AWG 26-24, Cable exit: angled Why buy this product  assembly without special tools  One-Piece Design  AWG 26-24  360° shielding  High shock and vibration resistance Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 20.000 g Custom tariff number 85366990 Country of origin Germany Technical data Mechanical characteristics Number of positions 8 Connection profile RJ45 Insertion/withdrawal cycles ≥ 750 Connection method IDC fast connection Conductor cross section 0.14 mm² ... 0.25 mm² (solid) 0.14 mm² ... 0.25 mm² (stranded) Connection cross section AWG 26 ... 24 (solid) 26 ... 24 (stranded) 10/10/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1421876 RJ45 connector - CUC-IND-C1ZNI-B/R4IE8 - 1421876 Technical data Mechanical characteristics Max. cable diameter 5 mm ... 9 mm External cable diameter 5 mm ... 9 mm Cable exit angled Wire diameter including insulation ≤ 1.6 mm Degree of protection IP20 Type RJ45, IP20 No. of cable outlets 1 Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C (cable, fixed installation) Material data Flammability rating according to UL 94 V0 Housing material Zinc die-cast Contact carrier material PC Contact material Copper alloy Contact surface material Gold over nickel Electrical characteristics Number of positions 8 Transmission speed 1 GBit/s Transmission characteristics (category) CAT5 (IEC 11801:2002) GRP transmission properties CAT5 (IEC 11801:2002) Transmission speed 1 Gbps Frequency range to 100 MHz Rated current 1.75 A Overvoltage category I Contact resistance 0.001 Ω (Wire – IDC) 0.005 Ω (Litz wires – IDC) Standards and Regulations Flammability rating according to UL 94 V0 Drawings 10/10/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1421876 RJ45 connector - CUC-IND-C1ZNI-B/R4IE8 - 1421876 Dimensional drawing 13,7 40 37,9 RJ45 connector, IP20 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27261204 eCl@ss 7.0 27440205 eCl@ss 8.0 27440101 eCl@ss 9.0 27440101 ETIM ETIM 5.0 EC002636 Accessories Accessories Data cable by the meter Network cable - VS-OE-OE-94B-100,0 - 1416567 Network cable, Ethernet CAT5 (1 Gbps), 8-position, PUR halogen-free, water blue RAL 5021, shielded, free cable end, on free cable end, Cable length: 100 m     10/10/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1421876 RJ45 connector - CUC-IND-C1ZNI-B/R4IE8 - 1421876 Accessories Network cable - VS-OE-OE-94B/... - 1417333 Network cable, Ethernet CAT5 (1 Gbps), 8-position, PUR halogen-free, water blue RAL 5021, shielded, free cable end, on free cable end, Cable length: Free entry (0.5 ... 400.0 m)     Electronics pliers Diagonal cutter - MICROFOX-SP-1 - 1212487 Electronic diagonal cutter, tapered head, without chamfer, with opening spring, non-reflective phosphate-treated surface, punched version     Terminal marking Marker for terminal blocks - TMT 5 R - 0816430 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK X, THERMOMARK S1.1, Perforated, Mounting type: Snap into universal marker groove, Snap into flat marker groove, for terminal block width: 5.2 mm, Lettering field: 6.4 x 5.15 mm     Marker for terminal blocks - TMT 5 R RD - 0816427 Marker for terminal blocks, Roll, red, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK X, THERMOMARK S1.1, Perforated, Mounting type: Snap into universal marker groove, Snap into flat marker groove, for terminal block width: 5.2 mm, Lettering field: 6.4 x 5.15 mm     Marker for terminal blocks - TMT 5 R GN - 0816401 Marker for terminal blocks, Roll, green, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK X, THERMOMARK S1.1, Perforated, Mounting type: Snap into universal marker groove, Snap into flat marker groove, for terminal block width: 5.2 mm, Lettering field: 6.4 x 5.15 mm     10/10/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1421876 RJ45 connector - CUC-IND-C1ZNI-B/R4IE8 - 1421876 Accessories Stripping tool - VS-CABLE-STRIP-VARIO - 1657407 Stripping tool, for the multi-level stripping of shielded cables     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 10/10/2016   Page 5 / 5