1424133

https://www.phoenixcontact.com/us/products/1424133 Flush-type connector - SACC-DSI-M12FSS-4CON-M16/0,5PE - 1424133 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type connector, Power, 4-position, Socket, M12, S power, Rear mounting, M16 x 1.5, Individual wires, cable length: 0.5 m Why buy this product  For compact devices: transmit high power in a confined space  Protection against mismatching thanks to S-coding  Pre-assembled with litz wires for immediate use  Customer-specific assemblies and litz wire lengths available  Sealed on the litz wire side for optimum leak-tightness  For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 STK GTIN GTIN 4046356693356 Weight per Piece (excluding packing) 60.000 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 03/05/2018   Page 1 / 5 https://www.phoenixcontact.com/us/products/1424133 Flush-type connector - SACC-DSI-M12FSS-4CON-M16/0,5PE - 1424133 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 12 A Rated voltage 630 V Rated surge voltage 6 kV Number of positions 4 Insulation resistance ≥ 100 MΩ Coding S power Standards/regulations M12 connector IEC 61076-2-111 In line with Signal type/category Power Status display No Overvoltage category III Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (M12 connector) Mounting type Rear mounting M16 x 1.5 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Material, knurls CuZn alloy, nickel-plated Sealing material FKM Cable Cable type PP litz wire Conductor cross section 1.5 mm² AWG signal line 16 Wire colors Black 1, black 2, black 3, green/yellow Material conductor insulation PP Conductor material Bare Cu litz wires Standards/specifications M12 connector IEC 61076-2-111 In line with Ambient temperature (operation) -40 °C ... 85 °C (without mechanical actuation) -40 °C ... 90 °C (cable, fixed installation) -30 °C ... 90 °C (cable, flexible installation) 03/05/2018   Page 2 / 5 https://www.phoenixcontact.com/us/products/1424133 Flush-type connector - SACC-DSI-M12FSS-4CON-M16/0,5PE - 1424133 Technical data Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-111 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram Dimensional drawing 24,1 5 22,6 2,8 L 1 3 2,8 8 M12x1 Pin assignment of M12 socket, 4-pos., S-coded, socket side view !3 17 M16x1,5 2 19 M12 flush-type socket Circuit diagram 1 BK1 2 BK2 3 BK3 4 GN/YE Contact assignment of the M12 socket Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 03/05/2018   Page 3 / 5 https://www.phoenixcontact.com/us/products/1424133 Flush-type connector - SACC-DSI-M12FSS-4CON-M16/0,5PE - 1424133 Classifications eCl@ss eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Listed / cUL Listed / EAC / cULus Listed Ex Approvals Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 16 Nominal current IN 12 A Nominal voltage UN 600 V  FILE E 468743 03/05/2018   Page 4 / 5 https://www.phoenixcontact.com/us/products/1424133 Flush-type connector - SACC-DSI-M12FSS-4CON-M16/0,5PE - 1424133 Approvals cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 16 Nominal current IN 12 A Nominal voltage UN 600 V  FILE E 468743 EAC      B.01742 cULus Listed       Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 03/05/2018   Page 5 / 5