1424180

https://www.phoenixcontact.com/gb/products/1424180 Flush-type connector - SACC-CI-M12FSX-8CON-L90 - 1424180 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) CAT6A contact carrier, Ethernet, 8-pos., rear mounting, with angled solder connection M12 panel feed-through, rear mounting Why buy this product ■ ■ ■ Reduced mounting costs thanks to two-piece device connector All common pin assignments and codings available Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate Key Commercial Data Packing unit 20 STK Minimum order quantity 20 STK GTIN Weight per Piece (excluding packing) 6.16 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Degree of protection IP67 (When plugged in) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. 08/06/2016   Page 1 / 6 https://www.phoenixcontact.com/gb/products/1424180 Flush-type connector - SACC-CI-M12FSX-8CON-L90 - 1424180 Technical data General Rated current at 40°C 0.5 A (Data) Rated voltage 50 V AC (Data) 60 V DC Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance > 100 MΩ Coding X - data Standards/regulations M12 connector IEC 61076-2-109 Signal type/category Ethernet CAT6A, 10 Gbps Overvoltage category III Degree of pollution 3 Connection method Wave soldering contacts Insertion/withdrawal cycles ≥ 100 Mounting type Rear mounting Type of packaging Tray Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PPA Cable Standards/specifications M12 connector IEC 61076-2-109 Transmission characteristics (category) CAT6A Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-109 Flammability rating according to UL 94 V0 Drawings Schematic diagram 5 3 30 6 7 1 8,5 2 8 Ø0,78 Pin assignment M12 connector, 8-pos., view socket side 14 4 Dimensional drawing -0,05 M12 female connector contact carrier 08/06/2016   Page 2 / 6 https://www.phoenixcontact.com/gb/products/1424180 Flush-type connector - SACC-CI-M12FSX-8CON-L90 - 1424180 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27260701 eCl@ss 5.1 27260701 eCl@ss 6.0 27180802 eCl@ss 7.0 27182702 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC001031 ETIM 4.0 EC002062 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 31261501 Approvals Approvals Approvals EAC / EAC / UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details EAC  EAC  08/06/2016   Page 3 / 6 https://www.phoenixcontact.com/gb/products/1424180 Flush-type connector - SACC-CI-M12FSX-8CON-L90 - 1424180 Approvals UL Recognized      Nominal current IN 0.5 A Nominal voltage UN 60 V cUL Recognized      Nominal current IN 0.5 A Nominal voltage UN 60 V EAC  cULus Recognized  Accessories Accessories Panel mounting base Housing screw connection - SACC-M12-SCO NUT - 1552243 M12 SPEEDCON housing screw connection for M12 female inserts, with O-ring, for all SPEEDCON-capable THR and wave soldering contact carriers     Housing screw connection - SACC-DSIV-M12-NUT - 1416144 Housing screw connection with M12 standard thread, with O-ring, for the two-piece straight M12 THR contact carrier and for the two-piece angled M12 contact carrier     08/06/2016   Page 4 / 6 https://www.phoenixcontact.com/gb/products/1424180 Flush-type connector - SACC-CI-M12FSX-8CON-L90 - 1424180 Accessories Housing screw connection - SACC-M12-SCO NUT L 90 - 1432460 M12-SPEEDCON housing screw connection for M12 female inserts, with flat gasket, for all Speedcon-compatible THR and wave soldering contact carriers     Housing screw connection - SACC-BP-F-M12/M15-6-THR - 1414004 Housing screw connection, SocketLink:M12, Rear mounting, M15 x 1     Housing screw connection - SACC-BP-F-M12/M15-7-THR - 1414003 Housing screw connection, SocketLink:M12, Rear mounting, M15 x 1     Housing screw connection - SACC-BP-F-M12/M15-6-THR SCO - 1414020 Housing screw connection, SocketLink:M12-SPEEDCON, Rear mounting, M15 x 1     Housing screw connection - SACC-BP-F-M12/M15-7-THR SCO - 1414005 Housing screw connection, SocketLink:M12-SPEEDCON, Rear mounting, M15 x 1     08/06/2016   Page 5 / 6 https://www.phoenixcontact.com/gb/products/1424180 Flush-type connector - SACC-CI-M12FSX-8CON-L90 - 1424180 Accessories Housing screw connection - SACC-M12 NUT PRESS - 1437889 Housing screw connection for two-piece M12 connectors for the reflow soldering process.     Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/06/2016   Page 6 / 6