1424194

https://www.phoenixcontact.com/us/products/1424194 Flush-type connector - SACC-CI-M12MS-12CON-L90 - 1424194 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 12-pos. without shroud, A-coded, with angled solder connection, contact insert only The figure shows the shielded version Your advantages  Reduced mounting costs thanks to two-piece device connector  All common pin assignments and codings available  Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate  Additional gasket for the device when not plugged in Key Commercial Data Packing unit 1 pc Minimum order quantity 20 pc GTIN GTIN 4046356692885 Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General 07/30/2019   Page 1 / 7 https://www.phoenixcontact.com/us/products/1424194 Flush-type connector - SACC-CI-M12MS-12CON-L90 - 1424194 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 1.5 A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 12 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category III Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type PCB mounting Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA6T Sealing material FKM Cable Conductor cross section 0.14 mm² Conductor structure signal line 7x 0.16 mm Core diameter including insulation 1.1 mm ±0.05 mm Thickness, insulation 0.21 mm Standards/specifications M12 connector IEC 61076-2-101 Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) 07/30/2019   Page 2 / 7 https://www.phoenixcontact.com/us/products/1424194 Flush-type connector - SACC-CI-M12MS-12CON-L90 - 1424194 Technical data Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Classifications eCl@ss eCl@ss 4.0 27060306 eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals 07/30/2019   Page 3 / 7 https://www.phoenixcontact.com/us/products/1424194 Flush-type connector - SACC-CI-M12MS-12CON-L90 - 1424194 Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 30 V Nominal current IN 1.5 A mm²/AWG/kcmil 26 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 30 V Nominal current IN 1.5 A mm²/AWG/kcmil 26  FILE E 118976  FILE E 118976 EAC      B.01742 cULus Recognized       Accessories Accessories Panel mounting base 07/30/2019   Page 4 / 7 https://www.phoenixcontact.com/us/products/1424194 Flush-type connector - SACC-CI-M12MS-12CON-L90 - 1424194 Accessories Housing screw connection - SACC-M12-SCO PLUG - 1551493 M12 SPEEDCON housing screw connection for M12 male inserts, with O-ring, for all SPEEDCON-capable THR and wave soldering contact carriers     Housing screw connection - SACC-DSIV-M12-PLUG - 1416145 Housing screw connection with M12 standard thread, with O-ring, for the two-piece straight M12 THR contact carrier and for the two-piece angled M12 contact carrier     Housing screw connection - SACC-M12-SCO PLUG L90 - 1436709 M12-SPEEDCON housing screw connection for M12 male inserts, with flat gasket, for all Speedcon-compatible THR and wave soldering contact carriers     Housing screw connection - SACC-BP-M-M12/M15-6-THR - 1413997 Housing screw connection, Plug, M12, Rear mounting, M15 x 1     Housing screw connection - SACC-BP-M-M12/M15-7-THR - 1413996 Housing screw connection, Plug, M12, Rear mounting, M15 x 1     07/30/2019   Page 5 / 7 https://www.phoenixcontact.com/us/products/1424194 Flush-type connector - SACC-CI-M12MS-12CON-L90 - 1424194 Accessories Housing screw connection - SACC-BP-M-M12/M15-6-THR SCO - 1413999 M12 SPEEDCON housing screw connection for M12 male inserts, with O-ring, for all SPEEDCON-capable THR and wave soldering contact carriers     Housing screw connection - SACC-BP-M-M12/M15-7-THR SCO - 1413998 Housing screw connection, Plug, M12-SPEEDCON, Rear mounting, M15 x 1     Housing screw connection - SACC-M12 PLUG PRESS - 1437892 M12 pin, housing screw connection, press-in version, for all Speedcon-compatible THR and wave soldering contact carriers     Housing screw connection - SACC-DSIV-M12-PLUG-9 THR - 1417984 M12 pin, front mounting THR with M14 screw fastening     Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     07/30/2019   Page 6 / 7 https://www.phoenixcontact.com/us/products/1424194 Flush-type connector - SACC-CI-M12MS-12CON-L90 - 1424194 Accessories Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 07/30/2019   Page 7 / 7