1424240

https://www.phoenixcontact.com/us/produkte/1424240 Flush-type connector - SACC-DSI-M8MS-5CON-M8-L90 DN - 1424240 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type plug-in connector, plug, 5-pos., DeviceNet, M8, rear/screw mounting with M10 fastening thread, with angled solder connection   Key commercial data Packing unit 0 Minimum order quantity 1 GTIN Custom tariff number 85366990 Country of origin GERMANY Technical data General data Rated current at 40°C 3A Rated voltage 30 V Number of positions 5 Volume resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Ambient temperature (operation) -25 °C ... 85 °C General characteristics Standards/regulations M8 plug-in connector IEC 61076-2-104 Coding B - inverse Surge voltage category II Pollution degree 3 Degree of protection IP67 Contact material Cu alloy Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated 17.01.2013   Page 1 / 5 https://www.phoenixcontact.com/us/produkte/1424240 Flush-type connector - SACC-DSI-M8MS-5CON-M8-L90 DN - 1424240 Technical data General characteristics Mounting type Rear mounting M8 x 1 With flat nut Connection method Solder pins Status display No Classifications ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002635 ETIM 5.0 EC002635 UNSPSC UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 Drawings Schematic diagram 2 4 3 1 5 Pin assignment M8 male connector, 5-pos., B-coded, view male side 17.01.2013   Page 2 / 5 https://www.phoenixcontact.com/us/produkte/1424240 Flush-type connector - SACC-DSI-M8MS-5CON-M8-L90 DN - 1424240 Drilling diagram 12,5 3,4 1,95 1 0,5 Ø 3,0 Ø 1,3 Drilling diagram 1,95 17.01.2013   Page 3 / 5 https://www.phoenixcontact.com/us/produkte/1424240 Flush-type connector - SACC-DSI-M8MS-5CON-M8-L90 DN - 1424240 Dimensioned drawing 2,0...4,0 +0,1 ø 8,1 0,2 x 45° Housing cutout for M8 flush-type connector, connector, one-section 17.01.2013   Page 4 / 5 https://www.phoenixcontact.com/us/produkte/1424240 © Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 17.01.2013   Page 5 / 5