https://www.phoenixcontact.com/pi/products/1424675
Data connector - SACC-M12MRB-5PL SH IB - 1424675
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Data connector, INTERBUS (500 kbps), 5-position, shielded, Plug angled M12, Coding: B, Push-in
connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm
Your advantages
Easy and tool-free connection by means of Push-in Technology
Conveniently connect stranded conductors, thanks to lever
Reliable and quick connection of electric cables
Flexible signal and data cabling
Flexible cable outlets with angled connectors
Quick and easy installation, thanks to Push-in connection technology
Key Commercial Data
Packing unit
1 pc
GTIN
GTIN
4055626376028
Technical data
Dimensions
Diameter housing
19 mm
Length
50 mm
External cable diameter
4 mm ... 8 mm
Stripping length of the sheath
31 mm
Stripping length of the individual wire
7 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 85 °C (Plug / socket)
Degree of protection
IP65
IP67
General
09/11/2020 Page 1 / 11
https://www.phoenixcontact.com/pi/products/1424675
Data connector - SACC-M12MRB-5PL SH IB - 1424675
Technical data
General
Note
NOTE: Observe the permissible bending radii when laying conductors,
since the degree of protection may be put in jeopardy if the bending
forces are too high. Alleviate mechanical loads upstream of the
connector, e.g. by using cable ties.
Rated current at 40°C
4 A (2 A when using 0.14 mm² conductors)
Rated voltage
48 V AC
60 V DC
Number of positions
5
Insulation resistance
≥ 100 MΩ
Coding
B - inverse
Standards/regulations
M12 connector IEC 61076-2-101
Shock, vibration EN 50155:2001
Signal type/category
INTERBUS, 500 kbps
Status display
No
Overvoltage category
II
Degree of pollution
3
Connection method
Push-in connection
Conductor cross section
0.14 mm² ... 0.75 mm² (without ferrule)
0.08 mm² ... 0.5 mm² (with ferrule)
0.14 mm² ... 0.75 mm² (solid)
Conductor cross section AWG
26 ... 18 (without ferrule)
28 ... 20 (with ferrule)
Insertion/withdrawal cycles
≥ 100
Torque
0.4 Nm (M12 knurl)
0.8 Nm (Connector with coupling sleeve)
3 Nm (Pressure nut with coupling sleeve)
Assembly instructions
The connector pin assignment can be rotated 45° to the cable outlet
The wires can be connected both with ferrules and without ferrules
Material
Flammability rating according to UL 94
V0
Contact material
CuSn
Contact surface material
Ni/Au
Contact carrier material
PA 6.6
Material of grip body
Zinc die-cast, nickel-plated
Material, knurls
Zinc die-cast, nickel-plated
Sealing material
NBR
Additional material specifications
TPE-U (Clamping cage, weight: 1.1 g)
PA 6 (Actuation lever)
Standards/regulations
PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24,
R25, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and
R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
09/11/2020 Page 2 / 11
https://www.phoenixcontact.com/pi/products/1424675
Data connector - SACC-M12MRB-5PL SH IB - 1424675
Technical data
Standards and Regulations
Standards/specifications
M12 connector IEC 61076-2-101
Shock, vibration EN 50155:2001
Flammability rating according to UL 94
V0
Standards/regulations
acc. to DIN EN 45545-2
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
09/11/2020 Page 3 / 11
https://www.phoenixcontact.com/pi/products/1424675
Data connector - SACC-M12MRB-5PL SH IB - 1424675
Dimensional drawing
Plug M12 SPEEDCON, angled, shielded
09/11/2020 Page 4 / 11
https://www.phoenixcontact.com/pi/products/1424675
Data connector - SACC-M12MRB-5PL SH IB - 1424675
Functional drawing
Slide the pressure nut and sleeve housing along the cable, strip the cable, shorten the shield, strip the single wires, connect the wires, in the case of
a straight sleeve housing gently twist the wires together, stick the shielding foil around the shortened shield, in the case of a cable outside diameter
< 6 mm stick an additional shielding foil around the wire pack, screw the sleeve housing to the plug insert, screw the pressure nut tight.
09/11/2020 Page 5 / 11
https://www.phoenixcontact.com/pi/products/1424675
Data connector - SACC-M12MRB-5PL SH IB - 1424675
Schematic diagram
Pin assignment M12 male connector, 5-pos., B-coded, male side
Classifications
eCl@ss
eCl@ss 10.0.1
27440102
eCl@ss 5.1
27143423
eCl@ss 6.0
27279200
eCl@ss 7.0
27440104
eCl@ss 8.0
27440104
eCl@ss 9.0
27440102
ETIM
ETIM 5.0
EC002635
ETIM 6.0
EC002635
ETIM 7.0
EC002635
09/11/2020 Page 6 / 11
https://www.phoenixcontact.com/pi/products/1424675
Data connector - SACC-M12MRB-5PL SH IB - 1424675
Approvals
Approvals
Approvals
EAC / UL Listed / cUL Listed / EAC / cULus Listed
Ex Approvals
Approval details
EAC
UL Listed
RU CDE.AI30.B.01102
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
E221474
Nominal voltage UN
60 V
Nominal current IN
4A
mm²/AWG/kcmil
26-18
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Nominal voltage UN
60 V
Nominal current IN
4A
mm²/AWG/kcmil
26-18
E221474
EAC
RU CDE.BL08.B.00511
cULus Listed
Accessories
Accessories
Cable end sleeve
09/11/2020 Page 7 / 11
https://www.phoenixcontact.com/pi/products/1424675
Data connector - SACC-M12MRB-5PL SH IB - 1424675
Accessories
Ferrule - AI 0,25- 6 YE - 3203024
Ferrule, sleeve length: 6 mm, length: 10.5 mm, color: yellow
Ferrule - A 0,25- 7 - 3202478
Ferrule, length: 7 mm, color: silver
Ferrule - A 0,34- 7 - 3009202
Ferrule, length: 7 mm, color: silver
Ferrule - A 0,5 - 6 - 3200218
Ferrule, length: 6 mm, color: silver
Ferrule - AI 0,5 - 6 WH - 3200687
Ferrule, sleeve length: 6 mm, length: 12 mm, color: white
Crimping tool
09/11/2020 Page 8 / 11
https://www.phoenixcontact.com/pi/products/1424675
Data connector - SACC-M12MRB-5PL SH IB - 1424675
Accessories
Crimping pliers - CRIMPFOX 6H - 1212046
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar
according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry
Data cable by the meter
Bus system cable - SAC-4P-950/... - 1543401
Bus system cable, INTERBUS, 4-position, PUR halogen-free, black RAL 9005, shielded, free cable end, on free
cable end, cable length: Free entry (0.5 ... 400 m)
Protective cap
Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873
M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 plugs
Screwdriver tools
Tool - SACC BIT M12-D20 - 1208445
Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive
Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600
Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits
Shield connection
09/11/2020 Page 9 / 11
https://www.phoenixcontact.com/pi/products/1424675
Data connector - SACC-M12MRB-5PL SH IB - 1424675
Accessories
Shielding foil - ALU-SB - 1404531
Shielding foil, for fixing the braided shield of shielded cables. Length: 4 cm, width: 1.2 cm
Stripping tool
Stripping tool - WIREFOX 2,5 - 1212368
Stripping tool, for conductors and cables with a conductor cross section from 0.08 to 2.5 mm, self-adjusting, stripping
length adjustable up to 15 mm, cutting capacity up to 6 mm² stranded/1.5 mm² solid
Torque tool
Torque screwdriver - TSD 04 SAC - 1208429
Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors
Torque screwdriver - TSD 08 SAC - 1212597
Torque screw driver with preset torque of 0.8 Nm, with 4 mm hexagon for accommodating SAC bits, two-component
handle with non-slip grip
Torque screwdriver - TSD-M 1,2NM - 1212224
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm
09/11/2020 Page 10 / 11
https://www.phoenixcontact.com/pi/products/1424675
Data connector - SACC-M12MRB-5PL SH IB - 1424675
Accessories
Torque screwdriver - TSD-M 3NM - 1212225
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 1.2 ‑ 3 Nm
Stripping tool - VS-CABLE-STRIP-VARIO - 1657407
Stripping tool, for the multi-level stripping of shielded cables
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg
Germany
Tel. +49 5235 300
Fax +49 5235 3 41200
http://www.phoenixcontact.com
09/11/2020 Page 11 / 11
