SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.
Data connector, PROFIBUS, INTERBUS, 5-position, shielded, Plug angled M12, coding: B, Screw connection, knurl material: Brass,
nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm
Your advantages
• Safe use in the field, thanks to a high degree of protection
• Screw connection: proven connection technology for a large selection of different conductors
• Reliable signal transmission – 360° shielding in environments with electromagnetic interference
Commercial data
Item number
1430417
Packing unit
1 pc
Minimum order quantity
1 pc
Sales key
BF30
Product key
BF2CBA
Catalog page
Page 422 (C-2-2019)
GTIN
4046356321495
Weight per piece (including packing)
69.2 g
Weight per piece (excluding packing)
67.84 g
Customs tariff number
85366990
Country of origin
CN
Jan 8, 2024, 10:04 AM
Page 1 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
Technical data
Notes
General
NOTE: Observe the permissible bending radii when laying
conductors, since the degree of protection may be put in
jeopardy if the bending forces are too high. Alleviate mechanical
loads upstream of the connector, e.g. by using cable ties.
Mounting
Assembly instructions
The connector pin assignment can be rotated 90° to the cable
outlet
Connection method
Screw connection
Product properties
Product type
Circular connector (cable-side)
Sensor type
PROFIBUS
Number of positions
5
Application
Data
No. of cable outlets
1
Shielded
yes
Coding
B
Cable outlet
angled
Pg screw connection
Pg9
Insulation characteristics
Overvoltage category
II
Degree of pollution
3
Dimensions
Dimensional drawing
Length
48.3 mm
External dimensions
Outside diameter
6 mm ... 8 mm
Housing
Diameter housing
20 mm
Material specifications
Flammability rating according to UL 94
HB
Seal material
NBR
Material of grip body
Brass, nickel-plated
Contact material
CuZn
Contact surface material
Au
Contact carrier material
PA
Material for screw connection
Brass, nickel-plated
Jan 8, 2024, 10:04 AM
Page 2 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
Connection data
Conductor connection
Connection method
Screw connection
Connection cross section
0.25 mm² ... 0.75 mm² (without ferrule)
0.14 mm² ... 0.5 mm² (with ferrule)
0.25 mm² ... 0.75 mm² (solid)
Connection cross section AWG
24 ... 18 (without ferrule)
26 ... 20 (with ferrule)
Stripping length of the individual wire
5 mm
Tightening torque
0.4 Nm (M12 knurl)
0.2 Nm (Screw terminal blocks)
1 Nm (Pressure nut with coupling sleeve)
Electrical properties
Rated surge voltage
1.5 kV
Contact resistance
≤ 3 mΩ
Insulation resistance
≥ 100 MΩ
Nominal voltage UN
48 V AC
60 V DC
Nominal current IN
4A
Mechanical properties
Mechanical data
Insertion/withdrawal cycles
≥ 100
Connector
Connection 1
Head design
Plug
Head cable outlet
angled
Head thread type
M12
Coding
B
Cable/line
Signal type/category
PROFIBUS
INTERBUS
Stripping length of the individual wire
5 mm
Environmental and real-life conditions
Ambient conditions
Degree of protection
IP67
Ambient temperature (operation)
-40 °C ... 85 °C (Plug / socket)
Jan 8, 2024, 10:04 AM
Page 3 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
Standards and regulations
Standard designation
M12 connector
Standards/specifications
IEC 61076-2-101
Jan 8, 2024, 10:04 AM
Page 4 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
Drawings
Schematic diagram
4
3
5
1
2
Pin assignment M12 socket, 5-pos., B-coded, female side
Jan 8, 2024, 10:04 AM
Page 5 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
Dimensional drawing
Ø 20
M 12
48,3
18
≈ 41
M12 x 1 male plug, angled, shielded
Jan 8, 2024, 10:04 AM
Page 6 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1430417
cUL Recognized
Approval ID: FILE E 221474
Nominal voltage UN
Nominal current IN
Cross section AWG
Cross section mm2
60 V
4A
-
-
Nominal voltage UN
Nominal current IN
Cross section AWG
Cross section mm2
60 V
4A
-
-
UL Recognized
Approval ID: FILE E 221474
cULus Recognized
Jan 8, 2024, 10:04 AM
Page 7 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
Classifications
ECLASS
ECLASS-11.0
27440102
ECLASS-12.0
27440116
ECLASS-13.0
27440116
ETIM
ETIM 9.0
EC002635
UNSPSC
UNSPSC 21.0
39121400
Jan 8, 2024, 10:04 AM
Page 8 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
Environmental product compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”
Jan 8, 2024, 10:04 AM
Page 9 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
Accessories
PROT-M12 FS-PA-CHAIN - Sealing cap
1430873
https://www.phoenixcontact.com/us/products/1430873
M12 sealing cap made of plastic with
fixing band, for sensor cables, for free
M12 plugs
A 0,25- 5 - Ferrule
3202465
https://www.phoenixcontact.com/us/products/3202465
Ferrule, color: silver
Jan 8, 2024, 10:04 AM
Page 10 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
TSD 04 SAC - Torque screwdriver
1208429
https://www.phoenixcontact.com/us/products/1208429
Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for
M12 connectors
SACC BIT M12-D20 - Tool
1208445
https://www.phoenixcontact.com/us/products/1208445
Nut for assembling M12 connectors for assembly with a knurl diameter of 20
mm, for 4 mm hexagonal drive
Jan 8, 2024, 10:04 AM
Page 11 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
TSD-M 1,2NM - Torque screwdriver
1212224
https://www.phoenixcontact.com/us/products/1212224
Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.
3 ‑ 1.2 Nm
TSD-M SAC-BIT ADAPTER - Adapter insert
1212600
https://www.phoenixcontact.com/us/products/1212600
Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to
accommodate SAC bits
Jan 8, 2024, 10:04 AM
Page 12 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
CRIMPFOX 6H - Crimping pliers
1212046
https://www.phoenixcontact.com/us/products/1212046
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part
1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm2 ...
6 mm2, unlockable pressure lock, lateral entry
WIREFOX SAC - Stripping tool
1212623
https://www.phoenixcontact.com/us/products/1212623
Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR
and PVC insulation, from Ø of 4.4 to 7 mm, any stripping length
Jan 8, 2024, 10:04 AM
Page 13 (14)
SACC-M12MRB-5CON-PG 9-SH - Data connector
1430417
https://www.phoenixcontact.com/us/products/1430417
VS-CABLE-STRIP-VARIO - Stripping tool
1657407
https://www.phoenixcontact.com/us/products/1657407
Stripping tool, for the multi-level stripping of shielded cables
SZF 1-0,6X3,5 - Screwdriver
1204517
https://www.phoenixcontact.com/us/products/1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed
screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
Phoenix Contact 2024 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Jan 8, 2024, 10:04 AM
Page 14 (14)