https://www.phoenixcontact.com/gb/products/1430446
Flush-type connector - SACC-DSI-FS-12CON-PG9/0,5 SCO - 1430446
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator flush-type socket, 12-pos., M12 SPEEDCON, rear/screw mounting with Pg9 thread, with 0.5
m halogen-free TPE litz wire, 12 x 0.14 mm²
Why buy this product
Pre-assembled with litz wires for immediate use
Customer-specific assemblies and litz wire lengths available
Sealed on the litz wire side for optimum leak-tightness
All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design
For high transmission safety: shield connection to the housing with optional EMC nut
SPEEDCON fast locking system reduces cabling times
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4046356325806
Weight per Piece (excluding packing)
29.100 g
Custom tariff number
85444290
Country of origin
Germany
Technical data
Dimensions
Length of cable
0.5 m
Ambient conditions
Ambient temperature (operation)
-25 °C ... 85 °C (Plug / socket)
Degree of protection
IP67
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
12/22/2016 Page 1 / 6
https://www.phoenixcontact.com/gb/products/1430446
Flush-type connector - SACC-DSI-FS-12CON-PG9/0,5 SCO - 1430446
Technical data
General
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C
1.5 A
Rated voltage
30 V
Rated surge voltage
0.8 kV
Number of positions
12
Insulation resistance
≥ 100 MΩ
Coding
A - standard
Standards/regulations
M12 connector IEC 61076-2-101
Status display
No
Overvoltage category
II
Degree of pollution
3
Connection method
Individual wires
Insertion/withdrawal cycles
> 100
Torque
3 Nm ... 4 Nm (Installation-side)
Mounting type
Rear mounting Pg9 With flat nut
Material
Flammability rating according to UL 94
V0
Contact material
CuZn
Contact surface material
Au
Contact carrier material
PA 66
Material, knurls
Zinc die-cast, nickel-plated
Sealing material
FKM
Cable
Cable type
TPE litz wire
Conductor cross section
0.14 mm²
AWG signal line
26
Conductor structure signal line
7x 0.16 mm
Core diameter including insulation
1.1 mm ±0.05 mm
Thickness, insulation
0.21 mm
Wire colors
Brown, blue, white, green, pink, yellow, black, gray, red, violet, gray/pink,
red/blue
Material conductor insulation
TPE
Conductor material
Tin-plated Cu litz wires
Standards/specifications
M12 connector IEC 61076-2-101
Insulation resistance
≥ 20 MΩ*km
Conductor resistance
≤ 57.6 mΩ/m
Nominal voltage, cable
300 V
Test voltage, cable
2000 V AC
Ambient temperature (operation)
-40 °C ... 85 °C (cable, fixed installation)
12/22/2016 Page 2 / 6
https://www.phoenixcontact.com/gb/products/1430446
Flush-type connector - SACC-DSI-FS-12CON-PG9/0,5 SCO - 1430446
Technical data
Cable
-25 °C ... 85 °C (cable, flexible installation)
Standards and Regulations
Standard designation
M12 connector
Standards/regulations
IEC 61076-2-101
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Dimensional drawing
Dimensional drawing
Ø16
Ø15,3 +0,1
13,5 +0,1
PG9
45
°
max.4,5
Housing cutout for Pg9 fastening thread, mounting panel with thread
1x45°
Housing cutout for Pg9 fastening thread, mounting panel with feedthrough hole (alternatively with surface as protection against rotation)
Schematic diagram
10
2
Dimensional drawing
19,6
3 11
4
9,5
2
500
1
5
9
12
17
PG9
6
7
18
8
Pin assignment M12, 12-pos., female side view
!4,5
M12 flush-type connector
12/22/2016 Page 3 / 6
https://www.phoenixcontact.com/gb/products/1430446
Flush-type connector - SACC-DSI-FS-12CON-PG9/0,5 SCO - 1430446
Circuit diagram
1
2
3
4
5
6
7
8
9
10
11
12
BN
BU
WH
GN
PK
YE
BK
GY
RD
VT
GYPK
RDBU
Contact assignment of the M12 socket
Classifications
eCl@ss
eCl@ss 4.0
27250313
eCl@ss 4.1
27250313
eCl@ss 5.0
27143423
eCl@ss 5.1
27143423
eCl@ss 6.0
27143423
eCl@ss 7.0
27449001
eCl@ss 8.0
27440103
eCl@ss 9.0
27440102
ETIM
ETIM 3.0
EC002061
ETIM 4.0
EC002061
ETIM 5.0
EC002061
ETIM 6.0
EC002061
UNSPSC
UNSPSC 6.01
31251501
UNSPSC 7.0901
31251501
UNSPSC 11
31251501
UNSPSC 12.01
31251501
UNSPSC 13.2
39121413
Approvals
Approvals
Approvals
cULus Recognized / EAC
Ex Approvals
12/22/2016 Page 4 / 6
https://www.phoenixcontact.com/gb/products/1430446
Flush-type connector - SACC-DSI-FS-12CON-PG9/0,5 SCO - 1430446
Approvals
Approval details
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E221474-20140616
mm²/AWG/kcmil
26
Nominal current IN
1.5 A
Nominal voltage UN
30 V
EAC
B.00767
Accessories
Accessories
Protective cap
Screw plug - PROT-M12 - 1680539
An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors
Screw plug - PROT-M12 SH - 1503302
An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type
connectors
Screw plug - PROT-M12 FB - 1555538
M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type
connectors for the food industry
Seal
12/22/2016 Page 5 / 6
https://www.phoenixcontact.com/gb/products/1430446
Flush-type connector - SACC-DSI-FS-12CON-PG9/0,5 SCO - 1430446
Accessories
Flat gasket - SACC-PG9-SEAL CLM - 1556320
Pg9 flat gasket for the rear mounting of M12 flush-type connectors with Pg9 fastening threads
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
12/22/2016 Page 6 / 6
