1430459

https://www.phoenixcontact.com/us/products/1430459 Flush-type connector - SACC-DSI-MS-12CON-PG9/0,5 SCO - 1430459 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 12-pos., M12 SPEEDCON, rear/screw mounting with Pg9 thread, with 0.5 m halogen-free TPE litz wire, 12 x 0.14 mm² Product Features ■ ■ ■ ■ ■ ■ Pre-assembled with litz wires for immediate use Customer-specific assemblies and litz wire lengths available Sealed on the litz wire side for optimum leak-tightness All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design For high transmission safety: shield connection to the housing with optional EMC nut SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 28.6 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General 04/13/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1430459 Flush-type connector - SACC-DSI-MS-12CON-PG9/0,5 SCO - 1430459 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 1.5 A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 12 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting Pg9 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Cable type TPE litz wire Conductor cross section 0.14 mm² AWG signal line 26 Conductor structure signal line 7x 0.16 mm Core diameter including insulation 1.1 mm ±0.05 mm Thickness, insulation 0.21 mm Wire colors Brown, blue, white, green, pink, yellow, black, gray, red, violet, gray/pink, red/blue Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 20 MΩ*km 04/13/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1430459 Flush-type connector - SACC-DSI-MS-12CON-PG9/0,5 SCO - 1430459 Technical data Cable Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 eCl@ss 9.0 27440103 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals 04/13/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1430459 Flush-type connector - SACC-DSI-MS-12CON-PG9/0,5 SCO - 1430459 Approvals Approvals EAC / cULus Recognized / EAC Ex Approvals Approvals submitted Approval details EAC  cULus Recognized      mm²/AWG/kcmil 26 Nominal current IN 1.5 A Nominal voltage UN 30 V EAC  Drawings Dimensional drawing Dimensional drawing 13,5 +0,1 1x45° PG9 Ø16 Ø15,3 +0,1 45 ° max.4,5 Housing cutout for Pg9 fastening thread, mounting panel with thread Housing cutout for Pg9 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) 04/13/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1430459 Flush-type connector - SACC-DSI-MS-12CON-PG9/0,5 SCO - 1430459 Schematic diagram 2 11 3 4 Dimensional drawing 23 10 500 2 10 11 1 5 17 M12x1 8 18 7 Pin assignment M12 male connector, 12-pos., male side view PG9 9 12 6 max. 4,5 M12 flush-type connector Circuit diagram 1 2 3 4 5 6 7 8 9 10 11 12 BN BU WH GN PK YE BK GY RD VT GYPK RDBU Contact assignment of the M12 plug Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/13/2016   Page 5 / 5