1432444

https://www.phoenixcontact.com/us/products/1432444 Flush-type connector - SACC-CI-M12FS-4CON-L 90 SH SCO - 1432444 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type connector, socket, 4-pos., A-coded, shielded, with angled solder connection, only contact insert Product Features ■ ■ ■ ■ Reduced mounting costs thanks to two-piece device connector All common pin assignments and codings available Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate Additional gasket for the device when not plugged in Key Commercial Data Packing unit 1 pc Minimum order quantity 20 pc Weight per Piece (excluding packing) 5.0 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. 04/28/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1432444 Flush-type connector - SACC-CI-M12FS-4CON-L 90 SH SCO - 1432444 Technical data General Rated current at 40°C 4A Rated voltage 250 V Rated surge voltage 2.5 kV Number of positions 4 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type PCB mounting Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Sealing material FKM / EPDM Cable Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27060306 eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27260701 eCl@ss 6.0 27279220 04/28/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1432444 Flush-type connector - SACC-CI-M12FS-4CON-L 90 SH SCO - 1432444 Classifications eCl@ss eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / UL Recognized / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 250 V 04/28/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1432444 Flush-type connector - SACC-CI-M12FS-4CON-L 90 SH SCO - 1432444 Approvals cUL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 250 V EAC  UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 250 V EAC  cULus Recognized  Drawings Schematic diagram 3 Drilling diagram 15 4 2, 0 1 9,8 Ø 2, 5,8 2 11,57 8,03 Pin assignment M12 socket, 4-pos., A-coded, view female side 8 +0 ,0 5 Ø 2 5 +0 ,0 5 3,54 4xØ1,2 ±0,05 Ø1 ±0,05 Drilling diagram only valid in connection with the SACC-M12-SCO NUT L90 housing (order no. 1432460) 04/28/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1432444 Flush-type connector - SACC-CI-M12FS-4CON-L 90 SH SCO - 1432444 Dimensional drawing Dimensional drawing 15,9 15,9 8,5 26,29 1 4 5 2 3 19,2 Ø1 M12 flush-type connector, socket, contact carrier, side view M12 flush-type connector, socket, contact carrier, front view Dimensional drawing Dimensional drawing 20 10 12,5 ≤1,5 Optionally with O-ring (green) for tight seal when plugged in. - the axial mating force of 80 N per connector may not be exceeded when using with assembled O-ring! - Avoid radial forces! 2 Ø1 9,2 Ø7 Locked area on the PCB Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/28/2016   Page 5 / 5