1432512

https://www.phoenixcontact.com/us/products/1432512 Flush-type connector - SACC-CI-M12FSB-5CON-L90 SH SCO - 1432512 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type connector, socket, 5-pos., B-coded, shielded, with angled solder connection, only contact insert Key commercial data Packing unit 1 PCE Minimum order quantity 20 PCE Weight per Piece (excluding packing) 5.0 GRM Custom tariff number 85389099 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Rated current at 40°C 4A Rated voltage 60 V Number of positions 5 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding B - inverse Standards/regulations M12 connector IEC 61076-2-101 Status display No Surge voltage category II Pollution degree 3 Connection method Solder pins 12/12/13   Page 1 / 5 https://www.phoenixcontact.com/us/products/1432512 Flush-type connector - SACC-CI-M12FSB-5CON-L90 SH SCO - 1432512 Technical data General Mounting type PCB mounting Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Sealing material FKM / EPDM Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 ETIM ETIM 3.0 EC001855 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized / GOST / GOST 12/12/13   Page 2 / 5 https://www.phoenixcontact.com/us/products/1432512 Flush-type connector - SACC-CI-M12FSB-5CON-L90 SH SCO - 1432512 Approvals Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 60 V GOST  GOST  Accessories Accessories Panel mounting base Housing screw connection - SACC-M12-SCO NUT - 1552243 M12 SPEEDCON housing screw connection for M12 female inserts, with O-ring, for all SPEEDCON-capable THR and wave soldering contact carriers     12/12/13   Page 3 / 5 https://www.phoenixcontact.com/us/products/1432512 Flush-type connector - SACC-CI-M12FSB-5CON-L90 SH SCO - 1432512 Accessories Housing screw connection - SACC-M12-SCO NUT L 90 - 1432460 M12-SPEEDCON housing screw connection for M12 female inserts, with flat gasket, for all Speedcon-compatible THR and wave soldering contact carriers     Housing screw connection - SACC-M12 NUT PRESS - 1437889 Housing screw connection for two-piece M12 connectors for the reflow soldering process.     Drawings Schematic diagram 3 Drilling diagram 15 3,54 4 ,0 1 8 +0 ,0 5 ø2 2 5 +0 ,0 5 5 9,8 2 5,8 8,03 11,57 Ø 2, Pin assignment M12 socket, 5-pos., B-coded, female side ±0,05 5xØ1,2 Ø1 ±0,05 Drilling diagram only valid in connection with the SACCM12-SCO NUT L90 housing (order no. 1432460) 12/12/13   Page 4 / 5 https://www.phoenixcontact.com/us/products/1432512 Flush-type connector - SACC-CI-M12FSB-5CON-L90 SH SCO - 1432512 Dimensioned drawing Dimensioned drawing 15,9 15,9 8,5 26,29 1 4 5 2 3 19,2 Ø1 M12 flush-type connector, socket, contact carrier, side view M12 flush-type connector, socket, contact carrier, front view Dimensioned drawing Dimensioned drawing 20 10 ≤1,5 Optionally with O-ring (green) for tight seal when plugged in. - the axial mating force of 80 N per connector may not be exceeded when using with assembled O-ring! - Avoid radial forces! 2 12,5 Ø1 9,2 Ø7 Locked area on the PCB © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 12/12/13   Page 5 / 5