1432635

https://www.phoenixcontact.com/us/products/1432635 Connector - SACC-MS-4SC M SCO - 1432635 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, 4-position, Plug straight M12 SPEEDCON, A-coded, Spring-cage connection, Knurl material: Zinc diecast, nickel-plated, External cable diameter 4 mm ... 8 mm Product Features  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Save time, thanks to installation with SPEEDCON fast locking system  Spring-cage connection: connect more securely, even in the case of shock and vibration, thanks to high contact forces     Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 20.0 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions External cable diameter 4 mm ... 8 mm Stripping length of the sheath 28 mm Stripping length of the individual wire 10 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Degree of protection IP65 IP67 General Rated current at 40°C 4A 01/27/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/1432635 Connector - SACC-MS-4SC M SCO - 1432635 Technical data General Rated voltage 250 V Number of positions 4 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Spring-cage connection Conductor cross section 0.14 mm² ... 0.5 mm² Conductor cross section AWG 26 ... 20 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.4 Nm (Connector with coupling sleeve) 1.5 Nm (Pressure nut with coupling sleeve) Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 V0 Contact material CuSn Contact surface material Ni/Au Contact carrier material TPU Material of grip body PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Standards and Regulations Order No. 1432635 Product key BF2CEA Standard designation M12 connector Standards/regulations IEC 61076-2-101 Connection in acc. with standard CUL Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27060306 01/27/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/1432635 Connector - SACC-MS-4SC M SCO - 1432635 Classifications eCl@ss eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27061801 eCl@ss 6.0 27279218 eCl@ss 7.0 27279218 eCl@ss 8.0 27440104 ETIM ETIM 3.0 EC001855 ETIM 4.0 EC002062 ETIM 5.0 EC002062 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 31261501 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details 01/27/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/1432635 Connector - SACC-MS-4SC M SCO - 1432635 Approvals UL Recognized      Nominal current IN 4A Nominal voltage UN 300 V cUL Recognized      Nominal current IN 4A Nominal voltage UN 300 V EAC  EAC  cULus Recognized  Drawings 01/27/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/1432635 Connector - SACC-MS-4SC M SCO - 1432635 Schematic diagram 4 3 1 2 Functional drawing 28 Ø 4 - 8 mm Pin assignment M12 plug, 4-pos., A-coded, view plug side 15 10 0,14 - 0,5 mm² 20 mm 0,4 Nm 15 15 1,5 Nm Strip 28 mm off the cable, 35 mm in the case of the angled version, strip single wires, push the pressure nut onto the cable. Slide the wires through the sleeve housing and connect, screw sleeve housing to the plug insert, screw the pressure nut tight. Dimensional drawing Ø19 M12 ca. 60 15 15 M12 SPEEDCON plug, straight Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 01/27/2016   Page 5 / 5