1436343

https://www.phoenixcontact.com/us/products/1436343 Flush-type connector - SACC-DSI-M12FS-8CON-L180P - 1436343 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type connector, socket, 8-pos., M12, A-coded, rear/screw mounting with Pg9 thread, with straight solder connection, plastic version   Key Commercial Data Packing unit 1 pc Minimum order quantity 20 pc Weight per Piece (excluding packing) 7.0 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding A - standard 10/18/2015   Page 1 / 4 https://www.phoenixcontact.com/us/products/1436343 Flush-type connector - SACC-DSI-M12FS-8CON-L180P - 1436343 Technical data General Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Pollution degree 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting Pg9 With locking nut Material Flammability rating according to UL 94 HB Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls PA 66 Sealing material Viton Cable Conductor cross section 0.25 mm² Conductor structure signal line 14x 0.15 mm Core diameter including insulation 1.15 mm ±0.07 mm Thickness, insulation 0.21 mm Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 10/18/2015   Page 2 / 4 https://www.phoenixcontact.com/us/products/1436343 Flush-type connector - SACC-DSI-M12FS-8CON-L180P - 1436343 Classifications eCl@ss eCl@ss 8.0 27440103 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals EAC Ex Approvals Approvals submitted Approval details EAC  Drawings 10/18/2015   Page 3 / 4 https://www.phoenixcontact.com/us/products/1436343 Flush-type connector - SACC-DSI-M12FS-8CON-L180P - 1436343 Dimensional drawing Schematic diagram Ø15,3 +0,1 max.4,5 13,5 +0,1 1x45° Pin assignment M12 socket, 8-pos., A-coded, view female side Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) Drilling diagram Dimensional drawing 8 19,5 Ø5,5 5 2 PG9 66° M12x1 6x 49 ° Ø1 13,4 17 22 Drilling diagram for SACC-DSI-M12FS-8CON-L180P M12 flush-type connector Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 10/18/2015   Page 4 / 4