1436408

https://www.phoenixcontact.com/us/products/1436408 Flush-type connector - SACC-E-M12MS-8CON-M16 PSCUP - 1436408 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type connector, male, 8-pos., M12, A-coded, front/screw mounting with M16 thread, with solder cups, plastic version Key Commercial Data Packing unit 1 pc Minimum order quantity 20 pc GTIN GTIN 4046356438353 Weight per Piece (excluding packing) 20.000 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2A Rated voltage 30 V 11/07/2019   Page 1 / 7 https://www.phoenixcontact.com/us/products/1436408 Flush-type connector - SACC-E-M12MS-8CON-M16 PSCUP - 1436408 Technical data General Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Solder cup Insertion/withdrawal cycles > 100 Torque 1.25 Nm ... 1.5 Nm (Installation-side) Mounting type Front mounting M16 x 1.5 With flat nut Material Flammability rating according to UL 94 HB Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material, knurls PA 6.6 Sealing material Viton Cable Standards/specifications M12 connector IEC 61076-2-101 Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 HB Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 25; For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 11/07/2019   Page 2 / 7 https://www.phoenixcontact.com/us/products/1436408 Flush-type connector - SACC-E-M12MS-8CON-M16 PSCUP - 1436408 Schematic diagram Pin assignment M12 socket, 8-pos., A-coded, view female side 11/07/2019   Page 3 / 7 https://www.phoenixcontact.com/us/products/1436408 Flush-type connector - SACC-E-M12MS-8CON-M16 PSCUP - 1436408 Dimensional drawing M12 flush-type connector 11/07/2019   Page 4 / 7 https://www.phoenixcontact.com/us/products/1436408 Flush-type connector - SACC-E-M12MS-8CON-M16 PSCUP - 1436408 Dimensional drawing Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 11/07/2019   Page 5 / 7 https://www.phoenixcontact.com/us/products/1436408 Flush-type connector - SACC-E-M12MS-8CON-M16 PSCUP - 1436408 Classifications eCl@ss eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC      B.01742 Accessories Accessories Protective cap 11/07/2019   Page 6 / 7 https://www.phoenixcontact.com/us/products/1436408 Flush-type connector - SACC-E-M12MS-8CON-M16 PSCUP - 1436408 Accessories Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Seal Flat gasket - SACC-M16-SEAL CLM - 1430394 M16 flat gasket, for rear mounting of M12 flush-type connectors with M16 fastening thread     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 11/07/2019   Page 7 / 7