https://www.phoenixcontact.com/pi/products/1436686
Flush-type connector - SACC-CI-M12MS-5CON-L90 SCO - 1436686
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator flush-type connector, plug, 5-pos., A-coded, with angled solder connection, only contact
insert
Your advantages
Reduced mounting costs thanks to two-piece device connector
All common pin assignments and codings available
Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front
plate
Additional gasket for the device when not plugged in
Key Commercial Data
Packing unit
20 pc
GTIN
GTIN
4046356438759
Technical data
Ambient conditions
Ambient temperature (operation)
-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
Degree of protection
IP67
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C
4A
Rated voltage
60 V
Rated surge voltage
1.5 kV
Number of positions
5
09/11/2020 Page 1 / 13
https://www.phoenixcontact.com/pi/products/1436686
Flush-type connector - SACC-CI-M12MS-5CON-L90 SCO - 1436686
Technical data
General
Insulation resistance
≥ 100 MΩ
Coding
A - standard
Standards/regulations
M12 connector IEC 61076-2-101
Status display
No
Overvoltage category
II
Degree of pollution
3
Connection method
Solder pins
Insertion/withdrawal cycles
> 100
Torque
3 Nm ... 4 Nm (Installation-side)
Mounting type
PCB mounting
Material
Flammability rating according to UL 94
V0
Contact material
CuZn
Contact surface material
Au
Contact carrier material
PA 6.6
Sealing material
FKM / EPDM
Cable
Standards/specifications
M12 connector IEC 61076-2-101
Standards and Regulations
Standards/specifications
M12 connector IEC 61076-2-101
Flammability rating according to UL 94
V0
Environmental Product Compliance
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
09/11/2020 Page 2 / 13
https://www.phoenixcontact.com/pi/products/1436686
Flush-type connector - SACC-CI-M12MS-5CON-L90 SCO - 1436686
Drilling diagram
Drilling diagram only valid in connection with the SACC-M12-SCO PLUG L90 housing (order no. 1436709)
09/11/2020 Page 3 / 13
https://www.phoenixcontact.com/pi/products/1436686
Flush-type connector - SACC-CI-M12MS-5CON-L90 SCO - 1436686
Dimensional drawing
M12 flush-type connector, plug, contact carrier, side view
09/11/2020 Page 4 / 13
https://www.phoenixcontact.com/pi/products/1436686
Flush-type connector - SACC-CI-M12MS-5CON-L90 SCO - 1436686
Dimensional drawing
M12 flush-type connector, plug, contact carrier, front view
09/11/2020 Page 5 / 13
https://www.phoenixcontact.com/pi/products/1436686
Flush-type connector - SACC-CI-M12MS-5CON-L90 SCO - 1436686
Dimensional drawing
Optionally with O-ring (green) for tight seal when plugged in.
- the axial mating force of 80 N per connector may not be exceeded when using with assembled O-ring!
- Avoid radial forces!
09/11/2020 Page 6 / 13
https://www.phoenixcontact.com/pi/products/1436686
Flush-type connector - SACC-CI-M12MS-5CON-L90 SCO - 1436686
Dimensional drawing
Locked area on the PCB
09/11/2020 Page 7 / 13
https://www.phoenixcontact.com/pi/products/1436686
Flush-type connector - SACC-CI-M12MS-5CON-L90 SCO - 1436686
Schematic diagram
Pin assignment M12 male connector, 5-pos., A-coded, male side
Classifications
eCl@ss
eCl@ss 10.0.1
27440102
eCl@ss 4.0
27260700
eCl@ss 4.1
27260700
eCl@ss 5.0
27260700
eCl@ss 5.1
27260700
eCl@ss 6.0
27279200
eCl@ss 7.0
27440103
eCl@ss 8.0
27440103
eCl@ss 9.0
27440102
09/11/2020 Page 8 / 13
https://www.phoenixcontact.com/pi/products/1436686
Flush-type connector - SACC-CI-M12MS-5CON-L90 SCO - 1436686
Classifications
ETIM
ETIM 3.0
EC002061
ETIM 4.0
EC002061
ETIM 5.0
EC002061
ETIM 6.0
EC002061
UNSPSC
UNSPSC 6.01
31251501
UNSPSC 7.0901
31251501
UNSPSC 11
31251501
UNSPSC 12.01
31251501
UNSPSC 13.2
39121413
UNSPSC 18.0
39121413
UNSPSC 19.0
39121413
UNSPSC 20.0
39121413
UNSPSC 21.0
39121413
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / EAC / cULus Recognized
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Nominal voltage UN
60 V
Nominal current IN
4A
mm²/AWG/kcmil
22
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Nominal voltage UN
60 V
FILE E 118976
FILE E 118976
09/11/2020 Page 9 / 13
https://www.phoenixcontact.com/pi/products/1436686
Flush-type connector - SACC-CI-M12MS-5CON-L90 SCO - 1436686
Approvals
Nominal current IN
4A
mm²/AWG/kcmil
22
EAC
B.01687
cULus Recognized
Accessories
Accessories
Panel mounting base
Housing screw connection - SACC-M12-SCO PLUG - 1551493
M12 SPEEDCON housing screw connection for M12 male inserts, with O-ring, for all SPEEDCON-capable THR and
wave soldering contact carriers
Housing screw connection - SACC-DSIV-M12-PLUG - 1416145
Housing screw connection with M12 standard thread, with O-ring, for the two-piece straight M12 THR contact carrier
and for the two-piece angled M12 contact carrier
Housing screw connection - SACC-M12-SCO PLUG L90 - 1436709
M12-SPEEDCON housing screw connection for M12 male inserts, with flat gasket, for all Speedcon-compatible THR
and wave soldering contact carriers
09/11/2020 Page 10 / 13
https://www.phoenixcontact.com/pi/products/1436686
Flush-type connector - SACC-CI-M12MS-5CON-L90 SCO - 1436686
Accessories
Housing screw connection - SACC-BP-M-M12/M15-6-THR - 1413997
Housing screw connection, Plug, M12, Rear mounting, M15 x 1
Housing screw connection - SACC-BP-M-M12/M15-7-THR - 1413996
Housing screw connection, Plug, M12, Rear mounting, M15 x 1
Housing screw connection - SACC-BP-M-M12/M15-6-THR SCO - 1413999
M12 SPEEDCON housing screw connection for M12 male inserts, with O-ring, for all SPEEDCON-capable THR and
wave soldering contact carriers
Housing screw connection - SACC-BP-M-M12/M15-7-THR SCO - 1413998
Housing screw connection, Plug, M12-SPEEDCON, Rear mounting, M15 x 1
Housing screw connection - SACC-M12 PLUG PRESS - 1437892
M12 pin, housing screw connection, press-in version, for all Speedcon-compatible THR and wave soldering contact
carriers
09/11/2020 Page 11 / 13
https://www.phoenixcontact.com/pi/products/1436686
Flush-type connector - SACC-CI-M12MS-5CON-L90 SCO - 1436686
Accessories
Housing screw connection - SACC-DSIV-M12-PLUG-9 THR - 1417984
M12 pin, front mounting THR with M14 screw fastening
Housing screw connection - SACC-BP-M-M12-THR PP - 1027661
Housing screw connection, Plug, M12-Push-Pull, Rear mounting, THR- und Wellenlötkontakte
Housing screw connection - SACC-FP-M-M12-THR PP - 1027679
Housing screw connection, Plug, M12-Push-Pull, Front mounting, THR- und Wellenlötkontakte
Protective cap
Sealing cap - PROT-M12 FS - 1560251
M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field
Sealing cap - PROT-M12 FS-M - 1430488
M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the
field
09/11/2020 Page 12 / 13
https://www.phoenixcontact.com/pi/products/1436686
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg
Germany
Tel. +49 5235 300
Fax +49 5235 3 41200
http://www.phoenixcontact.com
09/11/2020 Page 13 / 13
