1436738

https://www.phoenixcontact.com/us/products/1436738 Connector - SACC-MSD-4SC SH PN SCO - 1436738 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, PROFINET CAT5 (100 Mbps), 4-position, shielded, Plug straight M12, D-coded, Spring-cage connection, Knurl material: Zinc die-cast, nickel-plated, External cable diameter 4 mm ... 8 mm Product Features  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Save time, thanks to installation with SPEEDCON fast locking system  Spring-cage connection: connect more securely, even in the case of shock and vibration, thanks to high contact forces  Reliable signal transmission - 360° shielding in environments with electromagnetic interference           Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 37.0 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Wrench size, union nut 13 mm External diameter 4 mm ... 8 mm Stripping length of the sheath 33 mm Stripping length of the individual wire 10 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Degree of protection IP67 General 12/14/2015   Page 1 / 5 https://www.phoenixcontact.com/us/products/1436738 Connector - SACC-MSD-4SC SH PN SCO - 1436738 Technical data General Note This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling) Rated current at 40°C 4A Rated voltage 60 V DC 48 V AC Number of positions 4 Insulation resistance ≥ 100 MΩ Coding D - data Standards/regulations M12 connector IEC 61076-2-101 Shock, vibration EN 50155:2001 Signal type/category PROFINET CAT5 (IEC 11801), 100 Mbps Status display No Overvoltage category II Pollution degree 3 Connection method Spring-cage connection Conductor cross section 0.14 mm² ... 0.5 mm² Conductor cross section AWG 26 ... 20 Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.8 Nm (Connector with coupling sleeve) 3 Nm (Pressure nut with coupling sleeve) Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 V0 Contact material CuSn Contact surface material Ni/Au Contact carrier material TPU Material of grip body Zinc die-cast, nickel-plated Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Standard designation Shock, vibration Standards/regulations EN 50155:2001 12/14/2015   Page 2 / 5 https://www.phoenixcontact.com/us/products/1436738 Connector - SACC-MSD-4SC SH PN SCO - 1436738 Technical data Standards and Regulations Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440104 ETIM ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 5.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals EAC / EAC Ex Approvals Approvals submitted 12/14/2015   Page 3 / 5 https://www.phoenixcontact.com/us/products/1436738 Connector - SACC-MSD-4SC SH PN SCO - 1436738 Approvals Approval details EAC  EAC  Drawings Schematic diagram Functional drawing 33 10 12 Ø 4 - 8 mm Pin assignment M12 male connector, 4-pos., Dcoded, male side 0,14 - 0,5 mm² 20 mm 16 0,8 Nm 13 16 3 Nm Slide the pressure nut and sleeve housing along the cable, strip the cable, shorten the shield, strip the single wires, connect the wires, in the case of a straight sleeve housing gently twist the wires together, stick the shielding foil around the shortened shield, in the case of a cable outside diameter < 6 mm stick an additional shielding foil around the wire pack, screw the sleeve housing to the plug insert, screw the pressure nut tight. Dimensional drawing Ø19 M12 ca. 61 16 13 Plug, M12 x 1, straight, shielded 12/14/2015   Page 4 / 5 https://www.phoenixcontact.com/us/products/1436738 Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 12/14/2015   Page 5 / 5