1437119

https://www.phoenixcontact.com/us/products/1559974 Flush-type connector - SACC-DSI-MS-17CON-M12 SCO - 1559974 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type connector, plug, 17-pos., M12 SPEEDCON, A-coded, rear/screw mounting with M12 thread, with straight solder pins Key commercial data Packing unit 1 pc Minimum order quantity 20 pc Weight per Piece (excluding packing) 0.0080 GRM Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Length of the solder pin 6 mm Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 1.5 A Rated voltage 30 V Number of positions 17 Contact resistance ≤ 3 mΩ 03/26/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/1559974 Flush-type connector - SACC-DSI-MS-17CON-M12 SCO - 1559974 Technical data General Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Surge voltage category II Pollution degree 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M12 x 1 With flat nut Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002062 03/26/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/1559974 Flush-type connector - SACC-DSI-MS-17CON-M12 SCO - 1559974 Classifications UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized / GOST / GOST Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 1.5 A Nominal voltage UN 30 V GOST  GOST  03/26/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/1559974 Flush-type connector - SACC-DSI-MS-17CON-M12 SCO - 1559974 Accessories Accessories Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Drawings Dimensioned drawing Schematic diagram max.4,0 Ø12,2 +0,1 13 3 2 12 4 17 1 5 11 14 10 6 15 9 7 8 16 Pin assignment M12 male connector, 17-pos., male side view 11+0,1 Panel cutout Dimensioned drawing Drilling diagram 9x33° 2,8 5 15 Ø3,25 2 13 12 11 17 1 16 10 14 6 Ø6,5 45° 6 x6 0 3 4 5 15 ° M12x1 Ø1,1 ° Ø0,6 ° 15 7 14 31 ,5 5 20 8 9 Ø0,7 +0,05 M12 flush-type connector 03/26/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/1559974 Flush-type connector - SACC-DSI-MS-17CON-M12 SCO - 1559974 Dimensioned drawing 14 ,5 16 Ø 10,8 Front view of M12 flush-type connector Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 03/26/2014   Page 5 / 5