1437135

https://www.phoenixcontact.com/us/products/1437135 Flush-type connector - SACC-DSI-MS-17CON-M12/0,5 SCO - 1437135 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 17-pos., M12 SPEEDCON, rear/screw mounting with M12 thread, with 0.5 m halogen-free TPE litz wire, 17 x 0.14 mm²     Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 40.0 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 1.5 A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 17 Insulation resistance ≥ 100 MΩ Coding A - standard 11/30/2015   Page 1 / 5 https://www.phoenixcontact.com/us/products/1437135 Flush-type connector - SACC-DSI-MS-17CON-M12/0,5 SCO - 1437135 Technical data General Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Pollution degree 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M12 x 1 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Cable type TPE litz wire Conductor cross section 0.14 mm² AWG signal line 26 Conductor structure signal line 7x 0.16 mm Core diameter including insulation 1.1 mm ±0.05 mm Thickness, insulation 0.21 mm (Core insulation) Wire colors Color-coded DIN 47100 Material conductor insulation TPE Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 11/30/2015   Page 2 / 5 https://www.phoenixcontact.com/us/products/1437135 Flush-type connector - SACC-DSI-MS-17CON-M12/0,5 SCO - 1437135 Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27440103 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals cULus Recognized / EAC Ex Approvals Approvals submitted Approval details 11/30/2015   Page 3 / 5 https://www.phoenixcontact.com/us/products/1437135 Flush-type connector - SACC-DSI-MS-17CON-M12/0,5 SCO - 1437135 Approvals cULus Recognized      mm²/AWG/kcmil 26 Nominal current IN 1.5 A Nominal voltage UN 30 V EAC  Drawings Dimensional drawing Dimensional drawing Ø12,2 +0,1 M12x1 max.4,0 Housing cutout for M12 fastening thread, mounting panel with thread 11+0,1 Housing cutout for M12 fastening thread, mounting panel with feed-through hole (alternative with surface as protection against rotation) Schematic diagram Dimensional drawing 13 3 2 12 4 17 1 5 11 14 10 6 15 9 7 8 16 20 M12x1 500 Pin assignment M12 male connector, 17-pos., male side view 14 2,8 15 M12 flush-type connector 11/30/2015   Page 4 / 5 https://www.phoenixcontact.com/us/products/1437135 Flush-type connector - SACC-DSI-MS-17CON-M12/0,5 SCO - 1437135 Circuit diagram 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 BN BU WH GN PK YE BK GY RD VT GYPK RDBU WHGN BNGN WHYE YEBN WHGY Contact assignment of the M12 plug Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 11/30/2015   Page 5 / 5