1437449

https://www.phoenixcontact.com/us/products/1437449 Bus system flush-type socket - SACCBP-FSB-2CONPG9/0,5-910SCO - 1437449 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Bus system flush-type socket, PROFIBUS, 2-pos., M12, shielded, B-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 0.5 m bus cable, 2 x 0.25 mm²       Key commercial data Packing unit 11 Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Rated current at 40°C 4A Rated voltage 60 V Number of positions 2 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding B - inverse Standards/regulations M12 connector IEC 61076-2-101 Signal type/category PROFIBUS Status display No 28.10.2013   Page 1 / 5 https://www.phoenixcontact.com/us/products/1437449 Bus system flush-type socket - SACCBP-FSB-2CONPG9/0,5-910SCO - 1437449 Technical data General Surge voltage category II Pollution degree 3 Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Cable type PROFIBUS Cable type (abbreviation) 910 UL AWM style 21198 (80°C/300 V) Conductor cross section 2x 0.25 mm² (signal line) AWG signal line 24 Conductor structure signal line 19x 0.13 mm Core diameter including insulation 2.55 mm ±0.07 mm Wire colors Red, green Overall twist 2 cores with 2 fillers to the core Shielding Plastic-coated aluminum foil, tinned copper braided shield Optical shield covering 85 % External sheath, color Violet, RAL 4001 External cable diameter D 7.8 mm ± 0.2 mm Number of bending cycles 4000000 Bending radius 65 mm Traversing path 4.5 m Traversing rate 3 m/s Acceleration 3 m/s² Max. bending cycles 5000000 Bending radius 80 mm Traversing path 4.5 m Traversing rate 3 m/s Acceleration 3 m/s² Outer sheath, material PUR Material conductor insulation Foamed PE 28.10.2013   Page 2 / 5 https://www.phoenixcontact.com/us/products/1437449 Bus system flush-type socket - SACCBP-FSB-2CONPG9/0,5-910SCO - 1437449 Technical data Cable Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 5 GΩ*km Conductor resistance 157.2 Ω/km Working capacitance 30 nF Wave impedance nom. 150 Ω ±10 % (3 MHz ... 20 MHz) Shield attenuation ≤ 4.9 dB (at 16 MHz) Nominal voltage, cable 30 V Test voltage Core/Core 1500 V (50 Hz, 1 min.) Test voltage Core/Shield 1500 V (50 Hz, 1 min.) Flame resistance UL 1581, Sec. 1060 (FT-1) IEC 60332-1 Other resistance Low adhesion Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation) -30 °C ... 70 °C (cable, flexible installation) Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 28.10.2013   Page 3 / 5 https://www.phoenixcontact.com/us/products/1437449 Bus system flush-type socket - SACCBP-FSB-2CONPG9/0,5-910SCO - 1437449 Classifications UNSPSC UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Recognized / GOST / GOST Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 250 V GOST  GOST  Drawings 28.10.2013   Page 4 / 5 https://www.phoenixcontact.com/us/products/1437449 Bus system flush-type socket - SACCBP-FSB-2CONPG9/0,5-910SCO - 1437449 Dimensioned drawing Schematic diagram max.4,5 3 4 Ø15,3 +0,1 5 13,5 +0,1 2 1 Pin assignment M12 socket, 5-pos., B-coded, female side 1x45° Housing cutout for Pg9 fastening thread, mounting panel with feedthrough hole (alternatively with surface as protection against rotation) Cable cross section Dimensioned drawing 18 2,8 18 6,25 Nm PG9 18 17 2 6,5 PROFIBUS [910] M12 panel feed-through Circuit diagram 1 2 GN 4 RD 3 5 Contact assignment of the M12 socket © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 28.10.2013   Page 5 / 5