1440009

https://www.phoenixcontact.com/us/products/1440009 Flush-type connector - SACC-DSIV-FS-4CON-L180SCOTHRSH - 1440009 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type connector, socket, 4-pos., A-coded, M12 SPEEDCON, shielded, rear/screw mounting with M12 thread, with straight THR solder connection     Key commercial data Packing unit 11 Minimum order quantity 60 1 Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Rated current at 40°C 4A Rated voltage 60 V Number of positions 4 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding A - standard Status display No Surge voltage category II Pollution degree 3 Connection method THR solder connection Mounting type Rear mounting M12 x 1 With flat nut 01.11.2013   Page 1 / 4 https://www.phoenixcontact.com/us/products/1440009 Flush-type connector - SACC-DSIV-FS-4CON-L180SCOTHRSH - 1440009 Technical data Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PPA Material, knurls Zinc die-cast, nickel-plated Sealing material FKM / EPDM Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27143423 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Drawings 01.11.2013   Page 2 / 4 https://www.phoenixcontact.com/us/products/1440009 Flush-type connector - SACC-DSIV-FS-4CON-L180SCOTHRSH - 1440009 Schematic diagram 3 4 2 1 Dimensioned drawing Ø14,8 -0,1 3 Ø12,2 ±0,05 1,2 ±0,04 Pin assignment M12 socket, 4-pos., A-coded, view female side Housing cut-out for two-part M12 flush-type connectors with THR and wave soldering connection, version 1 Dimensioned drawing Drilling diagram Ø5 Ø1,2 4,5 1,2 ±0,04 Ø12,2 ±0,05 Ø1,4 8,5 7,05 5 45 ° 3 Ø1 Housing cut-out for two-part M12 flush-type connectors with THR and wave soldering connection, version 2 Dimensioned drawing Dimensioned drawing ≤2 ≤3 21 2 Ø12,1+0,1 15 7 3 Ø14 Ø16,5 Ø1 2 14 max.3 M12 flush-type connector 1 10,6 -0,1 Housing cutout for M12 fastening thread, mounting panel with feedthrough hole (alternative with surface as protection against rotation) 01.11.2013   Page 3 / 4 https://www.phoenixcontact.com/us/products/1440009 Flush-type connector - SACC-DSIV-FS-4CON-L180SCOTHRSH - 1440009 Dimensioned drawing 230 20 28 6 155 22 5,2 THR tray packaging © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 01.11.2013   Page 4 / 4