1440041

https://www.phoenixcontact.com/us/products/1440041 Connector - SACC-M12FS-5CON-DM 5-8 SH VA - 1440041 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, 5-position, shielded, Socket straight M12, A-coded, Screw connection, knurl material: Stainless steel 1.4404, cable gland M16, external cable diameter 5.5 mm ... 8.6 mm Your advantages  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Screw connection: proven connection technology for a large selection of different conductors  Reliable signal transmission - 360° shielding in environments with electromagnetic interference Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356481373 Weight per Piece (excluding packing) 60.000 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Diameter housing 20 mm Length 57 mm External cable diameter 5.5 mm ... 8.6 mm Stripping length of the sheath 35 mm Stripping length of the individual wire 5 mm 05/22/2019   Page 1 / 6 https://www.phoenixcontact.com/us/products/1440041 Connector - SACC-M12FS-5CON-DM 5-8 SH VA - 1440041 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Degree of protection IP65 IP67 IP69K General Rated current at 40°C 4A Rated voltage 60 V DC 48 V AC Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Screw connection Conductor cross section 0.25 mm² ... 0.75 mm² (without ferrule) 0.14 mm² ... 0.75 mm² (with ferrule) 0.25 mm² ... 0.75 mm² (solid) Conductor cross section AWG 24 ... 18 (without ferrule) 26 ... 20 (with ferrule) Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.2 Nm (Screw terminal blocks) 0.8 Nm ... 1 Nm (Pressure nut with sleeve housing with 4 mm ... 8 mm external cable diameter ) 1 Nm ... 1.4 Nm (Pressure nut with sleeve housing with 8 mm ... 12 mm external cable diameter ) Tightening torque Screw plug insert with sleeve housing as far it will go Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Material of grip body Stainless steel 1.4404 Material, knurls Stainless steel 1.4404 05/22/2019   Page 2 / 6 https://www.phoenixcontact.com/us/products/1440041 Connector - SACC-M12FS-5CON-DM 5-8 SH VA - 1440041 Technical data Material Sealing material FKM Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Connection in acc. with standard CUL Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram 3 Schematic diagram 4 1 5 5 2 4 3 2 1 Pin assignment M12 socket, 5-pos., A-coded, socket side view Cable connection side M12 (screw connection) Dimensional drawing Ø20 ca. 57 M12 x 1 socket, straight, shielded Classifications eCl@ss eCl@ss 4.0 27250313 eCl@ss 4.1 27250313 05/22/2019   Page 3 / 6 https://www.phoenixcontact.com/us/products/1440041 Connector - SACC-M12FS-5CON-DM 5-8 SH VA - 1440041 Classifications eCl@ss eCl@ss 5.0 27143423 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002062 ETIM 6.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals DNV GL / UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approval details DNV GL    http://exchange.dnv.com/tari/  TAE00002K4 05/22/2019   Page 4 / 6 https://www.phoenixcontact.com/us/products/1440041 Connector - SACC-M12FS-5CON-DM 5-8 SH VA - 1440041 Approvals  UL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 125 V Nominal current IN 4A  cUL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 125 V Nominal current IN 4A  FILE E 221474  FILE E 221474     RU CDE.AI30.B.01102 EAC      EAC-Zulassung cULus Recognized       EAC  Accessories Accessories Cable end sleeve Ferrule - A 0,25- 5 - 3202465 Ferrule, length: 5 mm, color: silver     Crimping tool 05/22/2019   Page 5 / 6 https://www.phoenixcontact.com/us/products/1440041 Connector - SACC-M12FS-5CON-DM 5-8 SH VA - 1440041 Accessories Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Stripping tool Stripping tool - WIREFOX SAC - 1212623 Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to 7 mm, any stripping length     Stripping tool - VS-CABLE-STRIP-VARIO - 1657407 Stripping tool, for the multi-level stripping of shielded cables     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 05/22/2019   Page 6 / 6