1440148

https://www.phoenixcontact.com/pi/products/1440148 Connector - SACC-M12MSB-5CON-DM 5-8 SH VA - 1440148 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, 5-position, shielded, Plug straight M12, Coding: B, Screw connection, knurl material: Stainless steel 1.4404, cable gland M16, external cable diameter 5.5 mm ... 8.6 mm Your advantages  Safe use in the field, thanks to a high degree of protection  Screw connection: proven connection technology for a large selection of different conductors  Reliable signal transmission - 360° shielding in environments with electromagnetic interference Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356483322 Technical data Dimensions Diameter housing 20 mm Length 62 mm External cable diameter 5.5 mm ... 8.6 mm Stripping length of the sheath 35 mm Stripping length of the individual wire 5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (Plug / socket) Degree of protection IP67 IP69K General Note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending 12/24/2021   Page 1 / 6 https://www.phoenixcontact.com/pi/products/1440148 Connector - SACC-M12MSB-5CON-DM 5-8 SH VA - 1440148 Technical data General forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Rated current at 40°C 4A Rated voltage 48 V AC 60 V DC Number of positions 5 Insulation resistance ≥ 100 MΩ Coding B - inverse Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Screw connection Conductor cross section 0.25 mm² ... 0.75 mm² (without ferrule) 0.14 mm² ... 0.75 mm² (with ferrule) 0.25 mm² ... 0.75 mm² (solid) Conductor cross section AWG 24 ... 18 (without ferrule) 26 ... 20 (with ferrule) Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.2 Nm (Screw terminal blocks) 0.8 Nm ... 1 Nm (Pressure nut with sleeve housing with 4 mm ... 8 mm external cable diameter ) 1 Nm ... 1.4 Nm (Pressure nut with sleeve housing with 8 mm ... 12 mm external cable diameter ) Tightening torque Screw plug insert with sleeve housing as far it will go Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA Material of grip body Stainless steel 1.4404 Material, knurls Stainless steel 1.4404 Sealing material FKM Standards and Regulations Standards/specifications M12 connector IEC 61076-2-101 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years 12/24/2021   Page 2 / 6 https://www.phoenixcontact.com/pi/products/1440148 Connector - SACC-M12MSB-5CON-DM 5-8 SH VA - 1440148 Technical data Environmental Product Compliance For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram 4 Schematic diagram 3 1 5 5 4 2 3 1 2 Pin assignment M12 male connector, 5-pos., B-coded, male side Cable connection side M12 (screw connection) Dimensional drawing Ø20 ca. 62 Plug, M12 x 1, straight, shielded Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 11.0 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 6.0 EC002062 ETIM 7.0 EC002635 12/24/2021   Page 3 / 6 https://www.phoenixcontact.com/pi/products/1440148 Connector - SACC-M12MSB-5CON-DM 5-8 SH VA - 1440148 Classifications UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 125 V Nominal current IN 4A cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 125 V Nominal current IN 4A cULus Recognized      FILE E 221474  FILE E 221474   12/24/2021   Page 4 / 6 https://www.phoenixcontact.com/pi/products/1440148 Connector - SACC-M12MSB-5CON-DM 5-8 SH VA - 1440148 Accessories Accessories Crimping tool Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry     Ferrule Ferrule - A 0,25- 5 - 3202465 Ferrule, length: 5 mm, color: silver     Screwdriver tools Tool - SACC BIT M12-W18 - 1231753 Nut for assembling M12 connectors designed for assembly, with a hexagonal knurl wrench size of 18 mm, with 4 mm hexagonal drive     Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Stripping tool Stripping tool - WIREFOX SAC - 1212623 Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to 7 mm, any stripping length     12/24/2021   Page 5 / 6 https://www.phoenixcontact.com/pi/products/1440148 Connector - SACC-M12MSB-5CON-DM 5-8 SH VA - 1440148 Accessories Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     Stripping tool - VS-CABLE-STRIP-VARIO - 1657407 Stripping tool, for the multi-level stripping of shielded cables     Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg Germany Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com 12/24/2021   Page 6 / 6