1440669

https://www.phoenixcontact.com/gb/products/1440669 Flush-type socket - SACC-DSIV-FS-8CON-L180-10G SCO - 1440669 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type socket, CAT6A, Ethernet, 8-pos., M12 SPEEDCON, rear/screw mounting with M12 fastening thread, with straight solder connection M12 panel feed-through, rear mounting Key Commercial Data Packing unit 20 STK Minimum order quantity 20 STK GTIN Weight per Piece (excluding packing) 10.53 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Degree of protection IP67 (When plugged in) General Rated current at 40°C 0.5 A Rated voltage 50 V AC 60 V DC Rated surge voltage 1.5 kV Number of positions 8 Insulation resistance > 100 MΩ Signal type/category Ethernet CAT6A Overvoltage category III 08/06/2016   Page 1 / 4 https://www.phoenixcontact.com/gb/products/1440669 Flush-type socket - SACC-DSIV-FS-8CON-L180-10G SCO - 1440669 Technical data General Degree of pollution 3 Connection method THR solder connection Insertion/withdrawal cycles ≥ 100 Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PPA Material of grip body Zinc die-cast, nickel-plated Material, knurls Zinc die-cast, nickel-plated Material Zinc die-cast (nickel-plated) Sealing material EPDM Standards and Regulations Flammability rating according to UL 94 V0 Drawings Schematic diagram 4 Dimensional drawing 5 3 Ø14,8 -0,1 3 Ø12,2 ±0,05 1,2 ±0,04 6 2 7 1 8 M12 socket pin assignment, 8-pos, view of socket side Housing cut-out for two-part M12 flush-type connectors with THR and wave soldering connection, version 1 Dimensional drawing Drilling diagram 5,6 3 2,8 Ø1,3 4 5 2,8 Ø10 Ø12,2 ±0,05 2 1,2 ±0,04 7 1 Housing cut-out for two-part M12 flush-type connectors with THR and wave soldering connection, version 2 5,6 6 3 8 Ø1,1 Soldering pad geometry 08/06/2016   Page 2 / 4 https://www.phoenixcontact.com/gb/products/1440669 Flush-type socket - SACC-DSIV-FS-8CON-L180-10G SCO - 1440669 Dimensional drawing 21,5 2 15 7 3 Ø14 Ø16,5 2 14 max. 3,0 M12 flush-type socket Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / EAC / EAC / cULus Recognized Ex Approvals 08/06/2016   Page 3 / 4 https://www.phoenixcontact.com/gb/products/1440669 Flush-type socket - SACC-DSIV-FS-8CON-L180-10G SCO - 1440669 Approvals Approvals submitted Approval details UL Recognized      Nominal current IN 0.5 A Nominal voltage UN 60 V cUL Recognized      Nominal current IN 0.5 A Nominal voltage UN 60 V EAC  EAC  EAC  cULus Recognized  Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/06/2016   Page 4 / 4