1441684

https://www.phoenixcontact.com/us/products/1441684 Flush-type connector - SACC-SQ-M12MS-8CON-20/0,5 - 1441684 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/Actuator flush-type plug, 8-pos., M12, A-coded, front/square flange mounting, with 0.5 m TPE litz wire, 8 x 0.25 mm² Your advantages  4 x fixing hole, 3.2 mm  With form seal for M3 screws  Pre-assembled with litz wires for immediate use  Customer-specific assemblies and litz wire lengths available  Sealed on the litz wire side for optimum leak-tightness  All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design  For high transmission safety: shield connection to the housing with optional EMC nut  SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356533027 Weight per Piece (excluding packing) 24.200 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions 11/05/2019   Page 1 / 8 https://www.phoenixcontact.com/us/products/1441684 Flush-type connector - SACC-SQ-M12MS-8CON-20/0,5 - 1441684 Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Front mounting Square flange 20 mm side length Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 6.6 Material of grip body Zinc die-cast, nickel-plated Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Cable type TPE litz wire Conductor cross section 0.25 mm² AWG signal line 24 Conductor structure signal line 14x 0.15 mm Core diameter including insulation 1.15 mm ±0.07 mm 11/05/2019   Page 2 / 8 https://www.phoenixcontact.com/us/products/1441684 Flush-type connector - SACC-SQ-M12MS-8CON-20/0,5 - 1441684 Technical data Cable Thickness, insulation 0.21 mm (Core insulation) Wire colors Brown, blue, white, gray, pink, green, yellow, red Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Standards/specifications M12 connector IEC 61076-2-101 Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 11/05/2019   Page 3 / 8 https://www.phoenixcontact.com/us/products/1441684 Flush-type connector - SACC-SQ-M12MS-8CON-20/0,5 - 1441684 Schematic diagram Pin assignment M12 plug, 8-pos., view plug side 11/05/2019   Page 4 / 8 https://www.phoenixcontact.com/us/products/1441684 Flush-type connector - SACC-SQ-M12MS-8CON-20/0,5 - 1441684 Dimensional drawing M12 flush-type plug 11/05/2019   Page 5 / 8 https://www.phoenixcontact.com/us/products/1441684 Flush-type connector - SACC-SQ-M12MS-8CON-20/0,5 - 1441684 Circuit diagram Contact assignment of the M12 plug and the M12 socket Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 4.0 EC002061 ETIM 5.0 EC002061 11/05/2019   Page 6 / 8 https://www.phoenixcontact.com/us/products/1441684 Flush-type connector - SACC-SQ-M12MS-8CON-20/0,5 - 1441684 Classifications ETIM ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 30 V Nominal current IN 2A mm²/AWG/kcmil 24  FILE E 118976 EAC      B.00767 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E221474-20140616     Nominal voltage UN 30 V 11/05/2019   Page 7 / 8 https://www.phoenixcontact.com/us/products/1441684 Flush-type connector - SACC-SQ-M12MS-8CON-20/0,5 - 1441684 Approvals     Nominal current IN 2A mm²/AWG/kcmil 24-22 Accessories Accessories Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 11/05/2019   Page 8 / 8