1441697

https://www.phoenixcontact.com/us/products/1441697 Flush-type connector - SACC-SQ-M12FS-8CON-20/0,5 - 1441697 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type socket, 8-pos., M12, A-coded, front/square flange mounting, with 0.5 m TPE litz wire, 8 x 0.25 mm² Why buy this product ■ ■ ■ ■ ■ ■ ■ ■ 4 x fixing hole, 3.2 mm With form seal for M3 screws Pre-assembled with litz wires for immediate use Customer-specific assemblies and litz wire lengths available Sealed on the litz wire side for optimum leak-tightness All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design For high transmission safety: shield connection to the housing with optional EMC nut SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 1 STK Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General 08/16/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/1441697 Flush-type connector - SACC-SQ-M12FS-8CON-20/0,5 - 1441697 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Front mounting Square flange 20 mm side length Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 66 Material of grip body Zinc die-cast, nickel-plated Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Cable type TPE litz wire Conductor cross section 0.25 mm² AWG signal line 24 Conductor structure signal line 14x 0.15 mm Core diameter including insulation 1.15 mm ±0.07 mm Thickness, insulation 0.21 mm (Core insulation) Wire colors Brown, blue, white, gray, pink, green, yellow, red Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Standards/specifications M12 connector IEC 61076-2-101 08/16/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/1441697 Flush-type connector - SACC-SQ-M12FS-8CON-20/0,5 - 1441697 Technical data Cable Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Drawings Schematic diagram Dimensional drawing 20 18,5 M12x1 L Pin assignment M12 socket, 8-pos., A-coded, view female side Ø3,2 Speedcon 14 12,5 Circuit diagram 1 WH 2 BN 3 GN 4 YE 5 GY 6 PK 7 BU 8 RD Contact assignment of the M12 plug and the M12 socket Classifications eCl@ss eCl@ss 4.0 27140815 08/16/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/1441697 Flush-type connector - SACC-SQ-M12FS-8CON-20/0,5 - 1441697 Classifications eCl@ss eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Recognized / EAC / cULus Recognized / EAC Ex Approvals Approvals submitted Approval details 08/16/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/1441697 Flush-type connector - SACC-SQ-M12FS-8CON-20/0,5 - 1441697 Approvals UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 2A Nominal voltage UN 30 V EAC  cULus Recognized      mm²/AWG/kcmil 22 Nominal current IN 2A Nominal voltage UN 30 V EAC  Accessories Accessories Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors     08/16/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/1441697 Flush-type connector - SACC-SQ-M12FS-8CON-20/0,5 - 1441697 Accessories Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/16/2016   Page 6 / 6