1441891

https://www.phoenixcontact.com/gb/products/1441891 Panel feed-through - SACC-DSI-M12FS-5CON-M16 SH - 1441891 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type socket, 5-pos. with shield contact, M12 SPEEDCON, A-coded, rear/screw mounting with M16 thread, with straight solder connection Why buy this product ■ ■ ■ ■ Easy PCB assembly: one-piece connectors for wave soldering All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design SPEEDCON fast locking system reduces cabling times For high transmission reliability: optional shield connection to the housing by means of shield contact Key Commercial Data Packing unit 20 STK GTIN Weight per Piece (excluding packing) 14.62 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Length of the solder pin 6 mm Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using 08/06/2016   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1441891 Panel feed-through - SACC-DSI-M12FS-5CON-M16 SH - 1441891 Technical data General a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 60 V Rated surge voltage 1.5 kV Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M16 x 1.5 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Standards/specifications M12 connector IEC 61076-2-101 Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Drawings 08/06/2016   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1441891 Panel feed-through - SACC-DSI-M12FS-5CON-M16 SH - 1441891 Dimensional drawing Schematic diagram max.4,5 3 4 Ø16,1 5 13,5 +0,1 2 1 Pin assignment M12 socket, 5-pos., A-coded, socket side view 1x45° Housing cutout for M16 fastening thread, mounting panel with feedthrough hole (alternatively with area as anti-rotation protection for panel thicknesses > 2 mm up to max. 4.5 mm) Drilling diagram Dimensional drawing 19,5 6 Ø1,2 19 10 17 Ø5 Ø14,6 Ø1,2* 3 32 M16x1,5 45° max. 4,5 Dimensional drawing 8 6, 18 6, 6 45° M12 front view Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 08/06/2016   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1441891 Panel feed-through - SACC-DSI-M12FS-5CON-M16 SH - 1441891 Classifications eCl@ss eCl@ss 9.0 27440102 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC / EAC / UL Recognized / EAC Ex Approvals Approvals submitted Approval details EAC  EAC  UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 60 V 08/06/2016   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1441891 Panel feed-through - SACC-DSI-M12FS-5CON-M16 SH - 1441891 Approvals EAC  Accessories Accessories Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry     Seal Flat gasket - SACC-M16-SEAL CLM - 1430394 M16 flat gasket, for rear mounting of M12 flush-type connectors with M16 fastening thread     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/06/2016   Page 5 / 5