1441943

https://www.phoenixcontact.com/pi/products/1441943 Panel feed-through - SACC-DSI-M12MS-12CON-M16 SH - 1441943 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 12-pos. with shield contact, M12 SPEEDCON, A-coded, rear/screw mounting with M16 thread, with straight solder connection Your advantages  Easy PCB assembly: one-piece connectors for wave soldering  All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design  SPEEDCON fast locking system reduces cabling times  For high transmission reliability: optional shield connection to the housing by means of shield contact Key Commercial Data Packing unit 20 pc GTIN GTIN 4046356534161 Technical data Dimensions Length of the solder pin 6 mm Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 (When plugged in) IP65 (When plugged in) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 1.5 A 09/11/2020   Page 1 / 9 https://www.phoenixcontact.com/pi/products/1441943 Panel feed-through - SACC-DSI-M12MS-12CON-M16 SH - 1441943 Technical data General Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 12 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M16 x 1.5 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Standards/specifications M12 connector IEC 61076-2-101 Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standards/specifications M12 connector IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 09/11/2020   Page 2 / 9 https://www.phoenixcontact.com/pi/products/1441943 Panel feed-through - SACC-DSI-M12MS-12CON-M16 SH - 1441943 Schematic diagram Pin assignment M12 male connector, 12-pos., male side view 09/11/2020   Page 3 / 9 https://www.phoenixcontact.com/pi/products/1441943 Panel feed-through - SACC-DSI-M12MS-12CON-M16 SH - 1441943 Drilling diagram 09/11/2020   Page 4 / 9 https://www.phoenixcontact.com/pi/products/1441943 Panel feed-through - SACC-DSI-M12MS-12CON-M16 SH - 1441943 Dimensional drawing 09/11/2020   Page 5 / 9 https://www.phoenixcontact.com/pi/products/1441943 Panel feed-through - SACC-DSI-M12MS-12CON-M16 SH - 1441943 Dimensional drawing Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with area as anti-rotation protection for panel thicknesses > 2 mm up to max. 4.5 mm) 09/11/2020   Page 6 / 9 https://www.phoenixcontact.com/pi/products/1441943 Panel feed-through - SACC-DSI-M12MS-12CON-M16 SH - 1441943 Dimensional drawing M12 front view Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 09/11/2020   Page 7 / 9 https://www.phoenixcontact.com/pi/products/1441943 Panel feed-through - SACC-DSI-M12MS-12CON-M16 SH - 1441943 Classifications ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals EAC / cULus Recognized Ex Approvals Approval details EAC   cULus Recognized      B.01687  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E221474-20140616     Nominal voltage UN 30 V Nominal current IN 1.5 A mm²/AWG/kcmil 26 09/11/2020   Page 8 / 9 https://www.phoenixcontact.com/pi/products/1441943 Panel feed-through - SACC-DSI-M12MS-12CON-M16 SH - 1441943 Accessories Accessories Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Seal Flat gasket - SACC-M16-SEAL CLM - 1430394 M16 flat gasket, for rear mounting of M12 flush-type connectors with M16 fastening thread     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg Germany Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com 09/11/2020   Page 9 / 9