1441972

https://www.phoenixcontact.com/us/products/1441972 Panel feed-through - SACC-DSI-M12FS-17CON-M16 SH - 1441972 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type connector, female connector, 17-pos. with shield contact, M12 SPEEDCON, A-coded, rear/screw mounting with M16 thread, with straight solder pins     Key Commercial Data Packing unit 1 pc Minimum order quantity 20 pc Weight per Piece (excluding packing) 15.0 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 1.5 A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 17 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ 10/18/2015   Page 1 / 4 https://www.phoenixcontact.com/us/products/1441972 Panel feed-through - SACC-DSI-M12FS-17CON-M16 SH - 1441972 Technical data General Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Pollution degree 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M16 x 1.5 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 10/18/2015   Page 2 / 4 https://www.phoenixcontact.com/us/products/1441972 Panel feed-through - SACC-DSI-M12FS-17CON-M16 SH - 1441972 Classifications UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC / EAC Ex Approvals Approvals submitted Approval details EAC  EAC  Drawings Dimensional drawing max.4,5 1x45° 2 3 13 4 17 1 5 11 14 10 6 15 9 16 8 7 12 Ø16,1 13,5 +0,1 Schematic diagram Pin assignment of M12 socket, 17-pos., A-coded, view of socket side Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with area as anti-rotation protection for panel thicknesses > 2 mm up to max. 4.5 mm) 10/18/2015   Page 3 / 4 https://www.phoenixcontact.com/us/products/1441972 Panel feed-through - SACC-DSI-M12FS-17CON-M16 SH - 1441972 Dimensional drawing Drilling diagram 19,5 9x33° 2,5 45° 16 11 12 17 2 13 3 15 7 14 6 5 4 17 19 max 4,5 Ø1,2 Ø6,5 6x6 0 15° M12x1 M16x1,5 1 10 9 8 Ø14,6 3 Ø3,25 2 ° 7,5 Ø0,7 +0,05 Dimensional drawing 18 6, 8 6, 6 45° M12 front view Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 10/18/2015   Page 4 / 4