https://www.phoenixcontact.com/us/products/1441998
Flush-type connector - SACC-CI-M12FS-17CON-L180 THR - 1441998
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator flush-type socket, 17-pos., A-coded, with straight THR solder connection, contact insert only
Your advantages
Reduced mounting costs thanks to two-piece device connector
Packaging available for automated pick and place assembly
All common pin assignments and codings available
Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front
plate
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
60 pc
GTIN
GTIN
4046356533102
Weight per Piece (excluding packing)
5.670 g
Custom tariff number
85366990
Country of origin
Germany
Technical data
Ambient conditions
Ambient temperature (operation)
-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
Degree of protection
IP67 (correctly plugged in and locked)
General
11/08/2019 Page 1 / 10
https://www.phoenixcontact.com/us/products/1441998
Flush-type connector - SACC-CI-M12FS-17CON-L180 THR - 1441998
Technical data
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C
1.5 A
Rated voltage
30 V
Rated surge voltage
0.8 kV
Number of positions
17
Insulation resistance
≥ 100 MΩ
Coding
A - standard
Standards/regulations
M12 connector IEC 61076-2-101
Status display
No
Overvoltage category
III
Degree of pollution
3
Test voltage
0.8 kV
Connection method
THR solder connection
Insertion/withdrawal cycles
> 100
Torque
3 Nm ... 4 Nm (Installation-side)
Mounting type
PCB mounting
Type of packaging
Tray
Delivery state
with assembly pad
Material
Flammability rating according to UL 94
V0
Contact material
CuZn
Contact surface material
Au
Contact carrier material
PPA
Cable
Standards/specifications
M12 connector IEC 61076-2-101
Ambient temperature (operation)
-40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (cable, flexible installation)
Standards and Regulations
Standard designation
M12 connector
Standards/regulations
IEC 61076-2-101
Flammability rating according to UL 94
V0
Environmental Product Compliance
Lead 7439-92-1
11/08/2019 Page 2 / 10
https://www.phoenixcontact.com/us/products/1441998
Flush-type connector - SACC-CI-M12FS-17CON-L180 THR - 1441998
Technical data
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Drilling diagram
Drilling diagram
11/08/2019 Page 3 / 10
https://www.phoenixcontact.com/us/products/1441998
Flush-type connector - SACC-CI-M12FS-17CON-L180 THR - 1441998
Dimensional drawing
M12 female connector contact carrier
Dimensional drawing
THR tray packaging
11/08/2019 Page 4 / 10
https://www.phoenixcontact.com/us/products/1441998
Flush-type connector - SACC-CI-M12FS-17CON-L180 THR - 1441998
Schematic diagram
Pin assignment of M12 socket, 17-pos., A-coded, view of socket side
Classifications
eCl@ss
eCl@ss 10.0.1
27440102
eCl@ss 4.0
27260700
eCl@ss 4.1
27260700
eCl@ss 5.0
27260700
eCl@ss 5.1
27260700
eCl@ss 6.0
27279200
eCl@ss 7.0
27440103
eCl@ss 8.0
27440103
eCl@ss 9.0
27440102
11/08/2019 Page 5 / 10
https://www.phoenixcontact.com/us/products/1441998
Flush-type connector - SACC-CI-M12FS-17CON-L180 THR - 1441998
Classifications
ETIM
ETIM 2.0
EC001297
ETIM 3.0
EC002061
ETIM 4.0
EC002061
ETIM 5.0
EC002061
ETIM 6.0
EC002061
UNSPSC
UNSPSC 6.01
31251501
UNSPSC 7.0901
31251501
UNSPSC 11
31251501
UNSPSC 12.01
31251501
UNSPSC 13.2
39121413
Approvals
Approvals
Approvals
UL Recognized / EAC
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Nominal voltage UN
30 V
Nominal current IN
1.5 A
mm²/AWG/kcmil
26
EAC
FILE E 118976
B.01742
11/08/2019 Page 6 / 10
https://www.phoenixcontact.com/us/products/1441998
Flush-type connector - SACC-CI-M12FS-17CON-L180 THR - 1441998
Accessories
Accessories
Contact insert
Sample set - SACC-CIM12FS17PL180THRSHSAMPLE - 1413563
Sensor/actuator flush-type socket, 17-pos. with shroud, A-coded, with straight THR solder connection, contact insert only
Panel mounting base
Housing screw connection - SACC-M12-SCO NUT - 1552243
M12 SPEEDCON housing screw connection for M12 female inserts, with O-ring, for all SPEEDCON-capable THR and
wave soldering contact carriers
Housing screw connection - SACC-DSIV-M12-NUT - 1416144
Housing screw connection with M12 standard thread, with O-ring, for the two-piece straight M12 THR contact carrier and
for the two-piece angled M12 contact carrier
Housing screw connection - SACC-M12-SCO NUT L 90 - 1432460
M12-SPEEDCON housing screw connection for M12 female inserts, with flat gasket, for all Speedcon-compatible THR
and wave soldering contact carriers
11/08/2019 Page 7 / 10
https://www.phoenixcontact.com/us/products/1441998
Flush-type connector - SACC-CI-M12FS-17CON-L180 THR - 1441998
Accessories
Housing screw connection - SACC-BP-F-M12/M15-6-THR - 1414004
Housing screw connection, Socket, M12, Rear mounting, M15 x 1
Housing screw connection - SACC-BP-F-M12/M15-7-THR - 1414003
Housing screw connection, Socket, M12, Rear mounting, M15 x 1
Housing screw connection - SACC-BP-F-M12/M15-6-THR SCO - 1414020
Housing screw connection, Socket, M12-SPEEDCON, Rear mounting, M15 x 1
Housing screw connection - SACC-BP-F-M12/M15-7-THR SCO - 1414005
Housing screw connection, Socket, M12-SPEEDCON, Rear mounting, M15 x 1
Housing screw connection - SACC-BP-F-M12/THR-1,0/1,8-9TIP - 1419630
M12 threaded sleeve with tolerance-compensating function, for straight, THR solderable M12 socket contact inserts.
Suitable for 1.0 mm ... 1.8 mm thick front plates.
11/08/2019 Page 8 / 10
https://www.phoenixcontact.com/us/products/1441998
Flush-type connector - SACC-CI-M12FS-17CON-L180 THR - 1441998
Accessories
Housing screw connection - SACC-BP-F-M12/THR-1,7/2,5-9TIP - 1419631
M12 threaded sleeve with tolerance-compensating function, for straight, THR solderable M12 socket contact inserts.
Suitable for 1.7 mm ... 2.5 mm thick front plates.
Housing screw connection - SACC-BP-F-M12/THR-2,4/3,2-9TIP - 1419633
M12 threaded sleeve with tolerance-compensating function, for straight, THR solderable M12 socket contact inserts.
Suitable for 2.4 mm ... 3.2 mm thick front plates.
Housing screw connection - SACC-BP-F-M12/THR-3,1/3,9-9TIP - 1419634
M12 threaded sleeve with tolerance-compensating function, for straight, THR solderable M12 socket contact inserts.
Suitable for 3.1 mm ... 3.9 mm thick front plates.
Housing screw connection - SACC-M12 NUT PRESS - 1437889
Housing screw connection for two-piece M12 connectors for the reflow soldering process.
Housing screw connection - SACC-DSIV-M12-NUT-9 THR - 1417989
M12 female connector, front mounting THR with M14 screw fastening
Protective cap
11/08/2019 Page 9 / 10
https://www.phoenixcontact.com/us/products/1441998
Flush-type connector - SACC-CI-M12FS-17CON-L180 THR - 1441998
Accessories
Screw plug - PROT-M12 - 1680539
An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors
Screw plug - PROT-M12 SH - 1503302
An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type
connectors
Screw plug - PROT-M12 FB - 1555538
M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type
connectors for the food industry
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
11/08/2019 Page 10 / 10
