1442272

https://www.phoenixcontact.com/us/products/1442272 Flush-type connector - SACCBP-FS-17CON-M16/2,0-PVCSCO - 1442272 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type socket, shielded, 17-pos., M12, A-coded, rear/screw mounting with M16 thread, with 2 m cable, 17 x 0.14 mm² Your advantages  Pre-assembled with cables in various standard lengths for immediate use  Customer-specific assemblies and cable lengths can be supplied  Sealed on the cable side for optimum tightness of seal  For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356533430 Weight per Piece (excluding packing) 180.000 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 1m Stripping length of the free conductor end 35 mm Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) 11/08/2019   Page 1 / 9 https://www.phoenixcontact.com/us/products/1442272 Flush-type connector - SACCBP-FS-17CON-M16/2,0-PVCSCO - 1442272 Technical data Ambient conditions Degree of protection IP67 (When plugged in) IP65 (When plugged in) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 1.5 A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 17 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M16 x 1.5 Thread with flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Cable type PVC black Cable type (abbreviation) PVC Conductor cross section 0.14 mm² AWG signal line 26 Conductor structure signal line 7x 0.16 mm Core diameter including insulation 1.1 mm ±0.05 mm Thickness, insulation 0.21 mm 11/08/2019   Page 2 / 9 https://www.phoenixcontact.com/us/products/1442272 Flush-type connector - SACCBP-FS-17CON-M16/2,0-PVCSCO - 1442272 Technical data Cable Wire colors White-brown, green-yellow, gray-pink, blue-red, black-violet, gray/pink-red/ blue, white/green-brown/green, white/yellow-yellow/brown-white/gray Overall twist Eight pairs around the filler to the core Shielding Tinned copper braided shield Optical shield covering 85 % External sheath, color black RAL 9005 External cable diameter 9.20 mm Number of bending cycles 2000000 Bending radius 92 mm Traversing path 10 m Traversing rate 3 m/s Acceleration 10 m/s² Outer sheath, material PVC Material, inner sheath PVC Material conductor insulation PVC Conductor material Tin-plated Cu litz wires Standards/specifications M12 connector IEC 61076-2-101 Conductor resistance 142 Ω/km Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Flame resistance DIN VDE 0472 part 804, test type B Resistance to oil DIN VDE 0472 Part 803, test type B Other resistance Hydrolysis and microbe resistant as per VDE 0282 section 10 Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flame resistance DIN VDE 0472 part 804, test type B Resistance to oil DIN VDE 0472 Part 803, test type B Other resistance Hydrolysis and microbe resistant as per VDE 0282 section 10 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 11/08/2019   Page 3 / 9 https://www.phoenixcontact.com/us/products/1442272 Flush-type connector - SACCBP-FS-17CON-M16/2,0-PVCSCO - 1442272 Technical data Environmental Product Compliance For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) 11/08/2019   Page 4 / 9 https://www.phoenixcontact.com/us/products/1442272 Flush-type connector - SACCBP-FS-17CON-M16/2,0-PVCSCO - 1442272 Dimensional drawing M12 flush-type connector 11/08/2019   Page 5 / 9 https://www.phoenixcontact.com/us/products/1442272 Flush-type connector - SACCBP-FS-17CON-M16/2,0-PVCSCO - 1442272 Circuit diagram Contact assignment of the M12 socket 11/08/2019   Page 6 / 9 https://www.phoenixcontact.com/us/products/1442272 Flush-type connector - SACCBP-FS-17CON-M16/2,0-PVCSCO - 1442272 Schematic diagram Pin assignment of M12 socket, 17-pos., A-coded, view of socket side Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 11/08/2019   Page 7 / 9 https://www.phoenixcontact.com/us/products/1442272 Flush-type connector - SACCBP-FS-17CON-M16/2,0-PVCSCO - 1442272 Classifications ETIM ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC Ex Approvals Approval details  EAC     B.00767 Accessories Accessories Plug for cable screw gland Screw plug - SACC-M16-SEALING PLUG SET - 1453368 M16 screw plug for unused M12 housing cutouts     11/08/2019   Page 8 / 9 https://www.phoenixcontact.com/us/products/1442272 Flush-type connector - SACCBP-FS-17CON-M16/2,0-PVCSCO - 1442272 Accessories Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry     Seal Flat gasket - SACC-M16-SEAL CLM - 1430394 M16 flat gasket, for rear mounting of M12 flush-type connectors with M16 fastening thread     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 11/08/2019   Page 9 / 9