1446375

https://www.phoenixcontact.com/us/products/1446375 Flush-type connector - SACC-EC-FS-5CON-M16/2,0 SCO - 1446375 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type socket, 5-pos., M12 SPEEDCON, A-coded, front/screw mounting with M16 thread, can be positioned, with 2.0 m TPE litz wire, 5 x 0.34 mm²     Key commercial data Packing unit 11 Minimum order quantity 50 1 Weight per Piece (excluding packing) 60.0 GRM Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 2m Ambient conditions Degree of protection IP67 General Rated current at 40°C 4A Rated voltage 60 V Number of positions 5 Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Surge voltage category II 01.11.2013   Page 1 / 4 https://www.phoenixcontact.com/us/products/1446375 Flush-type connector - SACC-EC-FS-5CON-M16/2,0 SCO - 1446375 Technical data General Pollution degree 3 Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Cable type TPE litz wire Conductor cross section 0.34 mm² AWG signal line 22 Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Black, brown,blue, white, gray Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27260701 eCl@ss 5.1 27260701 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 ETIM ETIM 4.0 EC002061 01.11.2013   Page 2 / 4 https://www.phoenixcontact.com/us/products/1446375 Flush-type connector - SACC-EC-FS-5CON-M16/2,0 SCO - 1446375 Classifications ETIM ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals UL Recognized Ex Approvals Approvals submitted Approval details UL Recognized      mm²/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 60 V Accessories Accessories Flat nut 01.11.2013   Page 3 / 4 https://www.phoenixcontact.com/us/products/1446375 Flush-type connector - SACC-EC-FS-5CON-M16/2,0 SCO - 1446375 Accessories Flat nut - SACC-E-MU-M16 - 1504097 Flat nut with M16 thread     Drawings Schematic diagram ° Dimensioned drawing M16x1,5 Ø17 +0,2 45 3 4 5 2 1 Housing cutout for M16 fastening thread, mounting panel with thread Pin assignment M12 socket, 5-pos., A-coded, socket side view Dimensioned drawing Circuit diagram 24,5 11,5 500 min.2,5 1 BN 2 WH 4 BK 3 BU 5 GY M16x1,5 2 M12 flush-type plug, can be positioned Contact assignment of the M12 plug and the M12 socket © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 01.11.2013   Page 4 / 4