1456129

SACC-DSI-M8FS-4CON-M10-L180 SH - Device connector rear mounting 1456129 https://www.phoenixcontact.com/us/products/1456129 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector rear mounting, 4-position, Socket, straight, M8, Rear mounting, M10, Solder pins Your advantages • Easy PCB assembly: one-piece connectors for wave soldering • Standard pin assignments and codings for signal transmission with a uniform design-in design • For high transmission reliability: optional shield connection to the housing and latching on the PCB Commercial data Item number 1456129 Packing unit 20 pc Minimum order quantity 20 pc Sales key AB22 Product key ABQJAB Catalog page Page 229 (C-2-2013) GTIN 4046356605762 Weight per piece (including packing) 6.56 g Weight per piece (excluding packing) 6.465 g Customs tariff number 85366990 Country of origin DE Jan 7, 2025, 7:56 AM Page 1 (7) SACC-DSI-M8FS-4CON-M10-L180 SH - Device connector rear mounting 1456129 https://www.phoenixcontact.com/us/products/1456129 Technical data Notes Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Mounting Mounting type Rear mounting M10 With flat nut Assembly note With flat nut Product properties Product type Circular connectors (device side) Number of positions 4 Shielded yes Coding A Thread type M8 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 HB Seal material NBR Contact material Cu alloy Contact surface material Au Contact carrier material PA 6.6 Material for screw connection Zinc die-cast, nickel-plated Electrical properties Rated surge voltage 1.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Nominal voltage UN 48 V AC 60 V DC Nominal current IN 4A Connection data Conductor connection Connection method Solder pins Jan 7, 2025, 7:56 AM Page 2 (7) SACC-DSI-M8FS-4CON-M10-L180 SH - Device connector rear mounting 1456129 https://www.phoenixcontact.com/us/products/1456129 Contact connection type Socket Tightening torque 1 Nm ... 1.5 Nm (Installation-side) Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M8 Environmental and real-life conditions Ambient conditions Degree of protection IP67 IP67 Ambient temperature (operation) -25 °C ... 85 °C -25 °C ... 85 °C Standards and regulations M8 Standard designation M8 connector Standards/specifications IEC 61076-2-104 Jan 7, 2025, 7:56 AM Page 3 (7) SACC-DSI-M8FS-4CON-M10-L180 SH - Device connector rear mounting 1456129 https://www.phoenixcontact.com/us/products/1456129 Drawings Schematic diagram 4 2 3 1 Pin assignment M8 socket, 4-pos., view female side Jan 7, 2025, 7:56 AM Page 4 (7) SACC-DSI-M8FS-4CON-M10-L180 SH - Device connector rear mounting 1456129 https://www.phoenixcontact.com/us/products/1456129 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1456129   cUL Recognized Approval ID: E221474-20070307 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 30 V 4A 24 - 24 - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 30 V 4A 24 - 24 - UL Recognized Approval ID: E221474-20070307 cULus Recognized Jan 7, 2025, 7:56 AM Page 5 (7) SACC-DSI-M8FS-4CON-M10-L180 SH - Device connector rear mounting 1456129 https://www.phoenixcontact.com/us/products/1456129 Classifications ECLASS ECLASS-13.0 27440109 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Jan 7, 2025, 7:56 AM Page 6 (7) SACC-DSI-M8FS-4CON-M10-L180 SH - Device connector rear mounting 1456129 https://www.phoenixcontact.com/us/products/1456129 Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(c) China RoHS Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP 5de401fd-7ac1-4799-a5cc-9048c4ff7bcb Phoenix Contact 2025 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 7, 2025, 7:56 AM Page 7 (7)