1456226

SACC-MINMS-5CON-PG11/2,5 - Connector 1456226 https://www.phoenixcontact.com/us/products/1456226 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Connector, Universal, 5-position, Plug straight 7/8"-16UNF, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg11, external cable diameter 8 mm ... 10 mm, Contact 3 capacitive Your advantages • Safe use in the field, thanks to a high degree of protection • Screw connection: proven connection technology for a large selection of different conductors Commercial data Item number 1456226 Packing unit 1 pc Minimum order quantity 1 pc Sales key BF30 Product key BF2FAA Catalog page Page 25 (C-2-2017) GTIN 4046356616850 Weight per piece (including packing) 64.15 g Weight per piece (excluding packing) 62.34 g Customs tariff number 85366990 Country of origin DE Oct 15, 2024, 12:40 AM Page 1 (8) SACC-MINMS-5CON-PG11/2,5 - Connector 1456226 https://www.phoenixcontact.com/us/products/1456226 Technical data Notes Assembly note NOTE: Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. Mounting Assembly note The wires can be connected both with ferrules and without ferrules Product properties Product type Circular connector (cable-side) Sensor type Universal Number of positions 5 No. of cable outlets 1 Shielded no Coding A Pg screw connection Pg11 Data management status Article revision 01 Insulation characteristics Overvoltage category III Degree of pollution 3 Dimensions Dimensional drawing Width 27 mm Height 27 mm Length 87 mm External dimensions Outside diameter 8 mm ... 10 mm Housing Diameter housing 27 mm Material specifications Flammability rating according to UL 94 HB Material of grip body PBT Contact material CuZn Oct 15, 2024, 12:40 AM Page 2 (8) SACC-MINMS-5CON-PG11/2,5 - Connector 1456226 https://www.phoenixcontact.com/us/products/1456226 Contact surface material Au Contact carrier material PUR/PA 6.6 Material for screw connection Zinc die-cast, nickel-plated Connection data Conductor connection Connection method Screw connection Connection cross section 0.34 mm² ... 2.5 mm² (without ferrule) 0.34 mm² ... 2.5 mm² (with ferrule) 0.34 mm² ... 2.5 mm² (solid) Connection cross section AWG 22 ... 16 (without ferrule) 22 ... 16 (with ferrule) Stripping length of the individual wire 7 mm Tightening torque 0.8 Nm (7/8" connectors) 0.4 Nm (Screw terminal blocks) 1 Nm ... 1.4 Nm (Pressure nut) Electrical properties Rated surge voltage 4 kV Contact resistance ≤ 5 mΩ Insulation resistance ≥ 100 MΩ Nominal voltage UN 300 V AC 300 V DC Nominal current IN 9A Mechanical properties Mechanical data Insertion/withdrawal cycles ≥ 100 Connector Connection 1 Head design Plug Head cable outlet straight Head thread type 7/8"-16UNF Coding A Cable/line Signal type/category Universal Stripping length of the individual wire 7 mm Environmental and real-life conditions Ambient conditions Degree of protection IP67 Oct 15, 2024, 12:40 AM Page 3 (8) SACC-MINMS-5CON-PG11/2,5 - Connector 1456226 https://www.phoenixcontact.com/us/products/1456226 Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Oct 15, 2024, 12:40 AM Page 4 (8) SACC-MINMS-5CON-PG11/2,5 - Connector 1456226 https://www.phoenixcontact.com/us/products/1456226 Drawings Dimensional drawing Ø27 7/8” ≈87 Schematic diagram 1 5 2 4 3 Pin assignment, plug, 7/8"-16UNF, 5-pos., view of male side Functional drawing 30 7 3 Oct 15, 2024, 12:40 AM Page 5 (8) SACC-MINMS-5CON-PG11/2,5 - Connector 1456226 https://www.phoenixcontact.com/us/products/1456226 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1456226    cUL Recognized Approval ID: FILE E 221474 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 600 V 16 A - - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 600 V 16 A - - UL Recognized Approval ID: FILE E 221474 EAC Approval ID: RU C-DE.BL08.B.00511 cULus Recognized Oct 15, 2024, 12:40 AM Page 6 (8) SACC-MINMS-5CON-PG11/2,5 - Connector 1456226 https://www.phoenixcontact.com/us/products/1456226 Classifications ECLASS ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Oct 15, 2024, 12:40 AM Page 7 (8) SACC-MINMS-5CON-PG11/2,5 - Connector 1456226 https://www.phoenixcontact.com/us/products/1456226 Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(c) China RoHS Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP e018faed-3387-4352-a7b1-d247f0e755ec Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Oct 15, 2024, 12:40 AM Page 8 (8)