1456255

https://www.phoenixcontact.com/us/products/1456255 Connector - SACC-MINMR-5CON-PG13/2,5 - 1456255 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator connector, male, angled, 5-pos., 7-8", screw connection, metal knurl, cable gland Pg13 Product Features  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Screw connection: proven connection technology for a large selection of different conductors   Key commercial data Packing unit 11 Custom tariff number 85366990 Country of origin Germany Technical data Dimensions External diameter 10 mm ... 12 mm Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Rated current at 40°C 9A Rated voltage 300 V Number of positions 5 Contact resistance ≤ 5 mΩ Insulation resistance ≥ 100 MΩ Coding A - standard Status display No 01.11.2013   Page 1 / 5 https://www.phoenixcontact.com/us/products/1456255 Connector - SACC-MINMR-5CON-PG13/2,5 - 1456255 Technical data General Surge voltage category II Pollution degree 3 Connection method Screw connection Conductor cross section 0.34 mm² ... 2.5 mm² AWG conductor cross section 22 ... 14 Insertion/withdrawal cycles ≥ 100 Torque 0.8 Nm (7/8" connectors) 0.4 Nm (Screw terminal blocks) 1 Nm ... 1.4 Nm (Pressure screw) Tightening torque Screw plug insert with sleeve housing as far it will go Assembly instructions The wires can be connected both with ferrules and without ferrules Material Inflammability class according to UL 94 HB Contact material CuZn Contact surface material Au Contact carrier material PUR / PA66 Material of grip body PBT Material, knurls Zinc die-cast, nickel-plated Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27260701 eCl@ss 5.1 27260701 eCl@ss 6.0 27279221 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 ETIM ETIM 4.0 EC002062 ETIM 5.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 01.11.2013   Page 2 / 5 https://www.phoenixcontact.com/us/products/1456255 Connector - SACC-MINMR-5CON-PG13/2,5 - 1456255 Classifications UNSPSC UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals GOST Ex Approvals Approvals submitted Approval details GOST  Accessories Accessories Protective cap Sealing cap - PROT-MINFS-PA-CHAIN - 1430912 7/8" sealing cap made of plastic with fixing band, for sensor cables, for 7/8" connectors     Screwdriver tools 01.11.2013   Page 3 / 5 https://www.phoenixcontact.com/us/products/1456255 Connector - SACC-MINMR-5CON-PG13/2,5 - 1456255 Accessories Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Adapter - SAC BIT MIN-D25 - 1212512 SAC nut, for assembling 7/8" connectors, with 4 mm hexagonal drive     Torque tool Torque screwdriver - TSD 08 SAC - 1212597 Torque screw driver with preset torque of 0.8 Nm, with 4 mm hexagon for accommodating SAC bits, two-component handle with non-slip grip     Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Drawings 01.11.2013   Page 4 / 5 https://www.phoenixcontact.com/us/products/1456255 Connector - SACC-MINMR-5CON-PG13/2,5 - 1456255 Schematic diagram 1 Dimensioned drawing 71,6 5 2 ca.53 7/8” Ø28 4 3 Pin assignment, plug, 7/8"-16UNF, 5-pos., view of male side 7/8" plug, angled Functional drawing 30 7 3 © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 01.11.2013   Page 5 / 5