1456433

https://www.phoenixcontact.com/us/products/1456433 Flush-type connector - SACC-SQ-M12MS-5CON-20-L180 - 1456433 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 5-pos. socket, M12, A-coded, front/square flange mounting, wave soldering Product Features ■ ■ ■ ■ M12 PCB connector that can be soldered directly with integrated torsion protection and shield connection Easy PCB assembly: one-piece connectors for wave soldering Standard pin assignments for signal and power transmission with a uniform design-in design SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc Weight per Piece (excluding packing) 12.0 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP20 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A 04/28/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/1456433 Flush-type connector - SACC-SQ-M12MS-5CON-20-L180 - 1456433 Technical data General Rated voltage 60 V Rated surge voltage 1.5 kV Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Signal type/category Universal Status display No Overvoltage category III Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Front mounting Square flange 20 mm side length Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Conductor cross section 0.34 mm² Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 04/28/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/1456433 Flush-type connector - SACC-SQ-M12MS-5CON-20-L180 - 1456433 Technical data Standards and Regulations Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC / cULus Recognized / EAC Ex Approvals Approvals submitted 04/28/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/1456433 Flush-type connector - SACC-SQ-M12MS-5CON-20-L180 - 1456433 Approvals Approval details EAC  cULus Recognized      mm²/AWG/kcmil 20 Nominal current IN 4A Nominal voltage UN 60 V EAC  Drawings Schematic diagram 4 Drilling diagram Ø1,2 3 3x Ø4,1 Ø3,4 5 14 2 Ø5 1 Pin assignment M12 male connector, 5-pos., Acoded, male side Dimensional drawing 18,2 3,11 3 M12 Ø1 20 M12 flush-type plug, square flange Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/28/2016   Page 4 / 4