1456466

https://www.phoenixcontact.com/us/products/1456466 Connector - SACC-M12MS-5CON-PG7-M SKIN - 1456466 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator connector, straight, 5-pos., M12, A-coded, screw connection, metal knurl, cable gland Pg7 SKINTOP® Your advantages  Safe use in the field, thanks to a high degree of protection  Flexible: connectors for on-site assembly  Screw connection: proven connection technology for a large selection of different conductors Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356616836 Weight per Piece (excluding packing) 25.200 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Diameter housing 20.2 mm Length 76 mm External cable diameter 4 mm ... 6 mm Stripping length of the sheath 20 mm Stripping length of the individual wire 5 mm Ambient conditions 11/05/2019   Page 1 / 10 https://www.phoenixcontact.com/us/products/1456466 Connector - SACC-M12MS-5CON-PG7-M SKIN - 1456466 Technical data Ambient conditions Ambient temperature (operation) -20 °C ... 80 °C (Plug / socket) Degree of protection IP67 General Note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Rated current at 40°C 4A Rated voltage 48 V AC 60 V DC Number of positions 5 Color handle area black Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Signal type/category Universal Status display No Overvoltage category II Degree of pollution 3 Connection method Screw connection Conductor cross section 0.25 mm² ... 0.75 mm² (without ferrule) 0.14 mm² ... 0.75 mm² (with ferrule) 0.25 mm² ... 0.75 mm² (solid) Conductor cross section AWG 24 ... 18 (without ferrule) 26 ... 20 (with ferrule) Insertion/withdrawal cycles ≥ 100 Torque 0.4 Nm (M12 knurl) 0.2 Nm (Screw terminal blocks) 0.8 Nm ... 1 Nm (Pressure screw) Tightening torque Screw plug insert with sleeve housing as far it will go Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 HB Contact material CuZn Contact surface material CuSnZn Contact carrier material PA Material of grip body PBT 11/05/2019   Page 2 / 10 https://www.phoenixcontact.com/us/products/1456466 Connector - SACC-M12MS-5CON-PG7-M SKIN - 1456466 Technical data Material Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 HB Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing Plug, M12 x 1, straight 11/05/2019   Page 3 / 10 https://www.phoenixcontact.com/us/products/1456466 Connector - SACC-M12MS-5CON-PG7-M SKIN - 1456466 Schematic diagram Cable connection side M12 (screw connection) 11/05/2019   Page 4 / 10 https://www.phoenixcontact.com/us/products/1456466 Connector - SACC-M12MS-5CON-PG7-M SKIN - 1456466 Schematic diagram Pin assignment M12 male connector, 5-pos., A-coded, male side 11/05/2019   Page 5 / 10 https://www.phoenixcontact.com/us/products/1456466 Connector - SACC-M12MS-5CON-PG7-M SKIN - 1456466 Schematic diagram Cable connection side M12 (screw connection) Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 11/05/2019   Page 6 / 10 https://www.phoenixcontact.com/us/products/1456466 Connector - SACC-M12MS-5CON-PG7-M SKIN - 1456466 Classifications eCl@ss eCl@ss 6.0 27279200 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 eCl@ss 9.0 27440102 ETIM ETIM 4.0 EC002062 ETIM 5.0 EC002062 ETIM 6.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC      RU CDE.AI30.B.01102 Accessories Accessories Cable by the meter 11/05/2019   Page 7 / 10 https://www.phoenixcontact.com/us/products/1456466 Connector - SACC-M12MS-5CON-PG7-M SKIN - 1456466 Accessories Cable reel - SAC-5P-100,0-PUR/0,34 - 1501676 Cable ring, PUR halogen-free black, 5-pos., conductor colors: Brown/white/blue/black/green-yellow, cable length: 100 m     Cable end sleeve Ferrule - A 0,25- 5 - 3202465 Ferrule, length: 5 mm, color: silver     Crimping tool Crimping pliers - CRIMPFOX 6H - 1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry     Protective cap Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873 M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 plugs     Screwdriver tools 11/05/2019   Page 8 / 10 https://www.phoenixcontact.com/us/products/1456466 Connector - SACC-M12MS-5CON-PG7-M SKIN - 1456466 Accessories Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive     Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Stripping tool Stripping tool - WIREFOX SAC - 1212623 Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to 7 mm, any stripping length     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     11/05/2019   Page 9 / 10 https://www.phoenixcontact.com/us/products/1456466 Connector - SACC-M12MS-5CON-PG7-M SKIN - 1456466 Accessories Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 11/05/2019   Page 10 / 10